Assessment of 4D magnetic printing capability of UV composite resin containing recycled Nd–Fe–B nanocrystalline particles
Progress in Additive Manufacturing · 09.11.2026
DOI: 10.1007/s40964-026-02049-0 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 09.11.2026. Verfasst von Gabriel Maia Vieira und 7 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Centro De Desenvolvimento Da Tecnologia Nuclear.
Abstract (Originalsprache)
The demand for rare-earth permanent magnets and supply risks have intensified the search for alternatives based on recycling strategies. In this work, the 4D printing of magnetic composites incorporating recycled Nd–Fe–B powders was evaluated. Two recycled powders produced via hydrogenation–disproportionation–desorption–recombination (HDDR) and dynamic HDDR (d-HDDR) routes were incorporated into a photopolymer resin and compared with a Nd–Fe–B powder. To establish whether recycled Nd–Fe–B powders can support magnetic programming in 4D-printed composites, magnetization patterns were encoded during fabrication using a digital light processing-based printing setup with a magnetic field. The magnetization encoding resolution was quantified by printing multidomain structures with in-plane and out-of-plane magnetization. While the commercial powder enabled submillimeter magnetic domains as small as 0.69 ± 0.05 mm, the recycled HDDR and d-HDDR powders achieved minimum domain sizes of 1.08 ± 0.16 mm and 1.28 ± 0.29 mm, respectively. To demonstrate functional performance, robotically controllable single-domain printed rectangles were fabricated and actuated under external magnetic fields. Post-magnetization substantially improved the stray-field magnitude and locomotion performance of the recycled composites, with the HDDR-based rectangles achieving the highest speed. Although the d-HDDR powder exhibited higher remanence and anisotropy, these properties did not translate directly into greater stray-field magnitude or faster locomotion, indicating that particle distribution, magnetization route, coercivity, and composite microstructure collectively influence the functional response. These results demonstrate that recycled Nd–Fe–B powders are viable materials for 4D magnetic printing, offering a sustainable alternative for fabricating magnetically actuated soft devices and robotic systems.
Förderung
- Centro De Desenvolvimento Da Tecnologia Nuclear
Zitieren
APA
Vieira, G. M., Rosa, M. A., Alcantara, A. A. B., Diller, E., Wendhausen, P. A. P., Martins, M. D., Santos, B. L. D. D., & Engerroff, J. A. B. (2026). Assessment of 4D magnetic printing capability of UV composite resin containing recycled Nd–Fe–B nanocrystalline particles. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-026-02049-0
Vancouver
Vieira GM, Rosa MA, Alcantara AAB, Diller E, Wendhausen PAP, Martins MD, et al. Assessment of 4D magnetic printing capability of UV composite resin containing recycled Nd–Fe–B nanocrystalline particles. Progress in Additive Manufacturing. 2026. doi:10.1007/s40964-026-02049-0
BibTeX
@article{Vieira2026,
author = {Vieira, Gabriel Maia and Rosa, Marcelo Augusto and Alcantara, Apuniano Aman Baldarrago and Diller, Eric and Wendhausen, Paulo Antônio Pereira and Martins, Maximiliano Delany and Santos, Bruno Lourencio Dias dos and Engerroff, Juliano Assis Baron},
title = {Assessment of 4D magnetic printing capability of UV composite resin containing recycled Nd–Fe–B nanocrystalline particles},
journal = {Progress in Additive Manufacturing},
year = {2026},
doi = {10.1007/s40964-026-02049-0}
}
EUVIMED