Enabling alloy screening via multi-material printing using a production PBF-LB machine
Progress in Additive Manufacturing · 2026-10 · 11 (10) · 11083-11095
DOI: 10.1007/s40964-026-01939-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 29.08.2026. Verfasst von Victor M Villapun und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, University of Birmingham, Birmingham, UK. Die Arbeit nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UK Research and Innovation.
Abstract (Originalsprache)
The development of novel functional alloys is often constrained by the onerous and costly discovery to validation process. Herein, we present a set-up to enable multi-material production of specimens through in-situ alloy formation using a production laser-based powder bed fusion (PBF-LB) printer. Multi-material samples were achieved through the combined use of a reduced build volume unit, to minimise material requirements (~ 16% powder volume of full build volume), and custom spacers to screen a Ti-Cu biomedical alloy design space allowing for identification of performance thresholds. Multi-material specimens were designed from 0 to 20 wt% Cu in 5% increments and rapidly assessed using high-throughput methods for mechanical and biological properties. Specifically, microhardness and non-destructive ultrasound analysis showcased a significant enhancement in hardness, from 199.24 ± 5.97 to 428.53 ± 26.75 HV, and reduction in longitudinal modulus, from 166.59 ± 4.95 to 148.37 ± 7.54 GPa, as copper content increased. Simultaneously, confocal imaging of pre-osteoblasts (MC3T3s), mesenchymal stem cells (hMSCs), and gram-positive Staphylococcus aureus bacterium after 24 h of contact, suggested 10% Cu as the breakpoint to maintain cytocompatibility and antimicrobial efficacy. Designed Ti-10Cu was identified as the region of interest for further alloy refinement, demonstrating the ability of this screening system to narrow down a material design space according to critical functional properties. This proof-of-concept study presents a feasible alloy discovery tool that utilises a production PBF-LB system without any machine modification.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, University of Birmingham, Birmingham, UK.
- School of Chemical Engineering, University of Birmingham, Birmingham, UK.
- Department of Engineering and Design, University of Sussex, Brighton, UK.
- School of Metallurgy and Materials, University of Birmingham, Birmingham, UK.
- Royal Orthopaedic Hospital, Birmingham, UK.
- Centre for Additive Manufacturing, University of Nottingham, Nottingham, UK.
ORCID-Profile: Victor M Villapun, Luke N Carter, Daniel Wilmot
Förderung
- UK Research and Innovation
Zitieren
APA
Villapun, V. M., Carter, L. N., Rabbitt, D., Huang, M., Wilmot, D., Stevenson, J. D., Hague, R. J. M., & Cox, S. C. (2026). Enabling alloy screening via multi-material printing using a production PBF-LB machine. Progress in Additive Manufacturing, 11(10), 11083-11095. https://doi.org/10.1007/s40964-026-01939-7
Vancouver
Villapun VM, Carter LN, Rabbitt D, Huang M, Wilmot D, Stevenson JD, et al. Enabling alloy screening via multi-material printing using a production PBF-LB machine. Progress in Additive Manufacturing. 2026;11(10):11083-11095. doi:10.1007/s40964-026-01939-7
BibTeX
@article{Villapun2026,
author = {Villapun, Victor M and Carter, Luke N and Rabbitt, Daisy and Huang, Ming and Wilmot, Daniel and Stevenson, Jonathan D and Hague, Richard J M and Cox, Sophie C},
title = {Enabling alloy screening via multi-material printing using a production PBF-LB machine},
journal = {Progress in Additive Manufacturing},
year = {2026},
volume = {11},
number = {10},
pages = {11083--11095},
doi = {10.1007/s40964-026-01939-7}
}
EUVIMED