EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Residual Stress Relaxation After Aging Heat Treatment in Laser Powder Bed Fusion CM247LC Superalloy Parts Quantified by Neutron-Diffraction-Validated Full-Field Eigenstrain Tomography

Fatih Uzun iD, Hector Basoalto, Tung Lik Lee, Alexander M Korsunsky

Progress in Additive Manufacturing · 2026-09 · 11 (9) · 9239-9254

DOI: 10.1007/s40964-026-01845-y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 07.08.2026. Verfasst von Fatih Uzun und 3 weiteren Autor:innen. Beteiligte Einrichtung: University of Oxford, Oxford, UK. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 96 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Residual stresses generated during laser powder bed fusion (LPBF) can compromise dimensional stability and in-service performance of nickel-based superalloy components, while the quantitative assessment of stress relaxation during post-build heat treatment remains challenging in three dimensions. This paper quantifies the effects of an aging treatment at 900 °C for 8 h on the residual stress and eigenstrain distributions in an LPBF-fabricated CM247LC component. Eigenstrain tomography is used to reconstruct full-field three-dimensional distributions of eigenstrain, residual elastic strain, and residual stress tensors from synchrotron X-ray diffraction measurements of a single residual elastic strain component acquired from only two orthogonal projections. Reconstruction accuracy is independently validated using neutron diffraction strain measurements. The results show substantial residual-stress relaxation after aging, including a marked reduction in the magnitude of all residual stress tensor components across the volume. Statistical analysis of the raw diffraction data demonstrates a pronounced homogenisation of internal macroscopic strains, accompanied by a corresponding decrease in reconstructed eigenstrain components toward near-zero values. Leveraging a highly streamlined two-projection tomographic protocol, these findings quantitatively reveal the three-dimensional mechanics of macroscopic (Type I) stress relaxation without the need for exhaustive experimental beamtime. The results provide critical volumetric data linking thermal exposure to the elimination of distortion-driving eigenstrain gradients. Ultimately, this work represents a significant advancement in additive manufacturing process evaluation, establishing this efficient tomographic framework as a practical, non-destructive tool for optimizing post-build heat treatments and ensuring dimensional stability in complex additively manufactured superalloys.

Schlagwörter

Stichwörter der Autor:innen

Additive manufacturingFull-field reconstructionInverse modellingPost-build heat treatmentSynchrotron X-ray diffractionViscoplastic creep

Autor:innen und Institutionen

  • University of Oxford, Oxford, UK.
  • University of Sheffield, Sheffield, UK.
  • ISIS Neutron and Muon Source, Didcot, UK.

ORCID-Profile: Fatih Uzun

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Uzun, F., Basoalto, H., Lee, T. L., & Korsunsky, A. M. (2026). Residual Stress Relaxation After Aging Heat Treatment in Laser Powder Bed Fusion CM247LC Superalloy Parts Quantified by Neutron-Diffraction-Validated Full-Field Eigenstrain Tomography. Progress in Additive Manufacturing, 11(9), 9239-9254. https://doi.org/10.1007/s40964-026-01845-y

Vancouver

Uzun F, Basoalto H, Lee TL, Korsunsky AM. Residual Stress Relaxation After Aging Heat Treatment in Laser Powder Bed Fusion CM247LC Superalloy Parts Quantified by Neutron-Diffraction-Validated Full-Field Eigenstrain Tomography. Progress in Additive Manufacturing. 2026;11(9):9239-9254. doi:10.1007/s40964-026-01845-y

BibTeX
@article{Uzun2026,
  author = {Uzun, Fatih and Basoalto, Hector and Lee, Tung Lik and Korsunsky, Alexander M},
  title = {Residual Stress Relaxation After Aging Heat Treatment in Laser Powder Bed Fusion CM247LC Superalloy Parts Quantified by Neutron-Diffraction-Validated Full-Field Eigenstrain Tomography},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {9},
  pages = {9239--9254},
  doi = {10.1007/s40964-026-01845-y}
}
Kostenlos starten →