EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-carbon S30C steel with superior strength and ductility fabricated by powder bed fusion-electron beam

Hao Wang, Kazuki Itoda, Kenta Yamanaka, Kenta Aoyagi, Tadashi Fujieda, Yunping Li, Akihiko Chiba

Progress in Additive Manufacturing · 2026-07 · 11 (7) · 6753-6764

DOI: 10.1007/s40964-026-01745-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 29.05.2026. Verfasst von Hao Wang und 6 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shimane University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study demonstrates the potential of electron beam powder bed fusion (PBF-EB) for the fabrication of low-carbon S30C steel with superior strength and ductility. In addition to investigating the effect of preheating temperature on microstructural evolution, we examined the effect of subsequent quenching and tempering treatments. At 1033 K, equiaxed α-Fe grains dominated, whereas at 1173 K, elongated grains and side plates aligned with the build direction were more prevalent, resulting in a pronounced < 101 > texture. These microstructural features introduced anisotropy along the build direction, which was effectively mitigated by tempering. Compared with conventionally processed low-carbon S30C steel, the additively manufactured specimens exhibited higher yield and tensile strengths and improved ductility, achieving an ultrahigh tensile strength of 1914 MPa in the as-quenched state, while the as-tempered state exhibited an elongation of ~ 17% with a tensile strength of ~ 886 MPa. The exceptional mechanical performance is attributed to the refined martensitic structures and high dislocation density induced by the PBF-EB process. These findings highlight the capability of PBF-EB to produce structural carbon steels with tunable properties by controlling the process parameters, thereby offering a cost-effective route for the industrial-scale additive manufacturing of steels.

Förderung

  • Shimane University

Zitieren

APA

Wang, H., Itoda, K., Yamanaka, K., Aoyagi, K., Fujieda, T., Li, Y., & Chiba, A. (2026). Low-carbon S30C steel with superior strength and ductility fabricated by powder bed fusion-electron beam. Progress in Additive Manufacturing, 11(7), 6753-6764. https://doi.org/10.1007/s40964-026-01745-1

Vancouver

Wang H, Itoda K, Yamanaka K, Aoyagi K, Fujieda T, Li Y, et al. Low-carbon S30C steel with superior strength and ductility fabricated by powder bed fusion-electron beam. Progress in Additive Manufacturing. 2026;11(7):6753-6764. doi:10.1007/s40964-026-01745-1

BibTeX
@article{Wang2026,
  author = {Wang, Hao and Itoda, Kazuki and Yamanaka, Kenta and Aoyagi, Kenta and Fujieda, Tadashi and Li, Yunping and Chiba, Akihiko},
  title = {Low-carbon S30C steel with superior strength and ductility fabricated by powder bed fusion-electron beam},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {7},
  pages = {6753--6764},
  doi = {10.1007/s40964-026-01745-1}
}
Kostenlos starten →