Reducing distortion using a displacement-controlled hatching strategy in PBF-LB/M
Progress in Additive Manufacturing · 2026-07 · 11 (7) · 6719-6730
DOI: 10.1007/s40964-026-01743-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 29.05.2026. Verfasst von Christoph Lee und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universität Bremen.
Abstract (Originalsprache)
In the process of additive manufacturing, specifically powder bed fusion of metals using a laser beam (PBF-LB/M), dealing with the in-situ distortion of overhang structures is a major challenge. In this study, a displacement-controlled hatching strategy is proposed based on displacement simulation results to reduce such displacements. The residual displacement for a propeller-geometry was predicted using the inherent strain method. Subsequently, the hatch vectors were planned orthogonal to the simulated displacement vectors. The findings indicate that aligning the hatch orientation based on simulation results decreases displacement. The median out-of-plane displacement of a propeller blade (AlSi10Mg) was reduced by up to 70% relative to a reference scan strategy. However, no significant benefit of the displacement-controlled hatching strategy was observed for the manufacturing of shallow overhangs below 15° in the investigated geometry. This approach shows potential for enhancing the precision and stability of PBF-LB/M processes. However, the recoater and gas flow direction were limiting constraints on the application of the proposed hatching strategy and need to be considered in an automated application of the proposed hatching strategy.
Förderung
- Universität Bremen
Zitieren
APA
Lee, C., Ostermann, N., Grimm, T., Sehrt, J. T., & Ploshikhin, V. (2026). Reducing distortion using a displacement-controlled hatching strategy in PBF-LB/M. Progress in Additive Manufacturing, 11(7), 6719-6730. https://doi.org/10.1007/s40964-026-01743-3
Vancouver
Lee C, Ostermann N, Grimm T, Sehrt JT, Ploshikhin V. Reducing distortion using a displacement-controlled hatching strategy in PBF-LB/M. Progress in Additive Manufacturing. 2026;11(7):6719-6730. doi:10.1007/s40964-026-01743-3
BibTeX
@article{Lee2026,
author = {Lee, Christoph and Ostermann, Niklas and Grimm, Tobias and Sehrt, Jan T. and Ploshikhin, Vasily},
title = {Reducing distortion using a displacement-controlled hatching strategy in PBF-LB/M},
journal = {Progress in Additive Manufacturing},
year = {2026},
volume = {11},
number = {7},
pages = {6719--6730},
doi = {10.1007/s40964-026-01743-3}
}
EUVIMED