EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of process strategies on the processability of CM247LC in powder bed fusion of metals using a laser beam

Nele Kretzer, Niklas Ostermann, Tobias Grimm, Jan T. Sehrt

Progress in Additive Manufacturing · 2026-07 · 11 (7) · 6709-6717

DOI: 10.1007/s40964-026-01740-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 09.06.2026. Verfasst von Nele Kretzer und 3 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ruhr-Universität Bochum.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, the processability of the nickel-based superalloy CM247LC in powder bed fusion of metals using a laser beam (PBF-LB/M) is systematically investigated. The focus is on the influence of inter-hatch waiting times and hatch permutation patterns. A baseline parameter set was established in preliminary studies to ensure a stable melt pool formation and defect-free consolidation. Based on these findings, the effects of controlled temporal delays between adjacent vectors and variations in hatch sequence are studied. The samples are analyzed in terms of relative density and the mean peak temperature of each layer, recorded using an in-situ thermographic camera system.

Förderung

  • Ruhr-Universität Bochum

Zitieren

APA

Kretzer, N., Ostermann, N., Grimm, T., & Sehrt, J. T. (2026). Effects of process strategies on the processability of CM247LC in powder bed fusion of metals using a laser beam. Progress in Additive Manufacturing, 11(7), 6709-6717. https://doi.org/10.1007/s40964-026-01740-6

Vancouver

Kretzer N, Ostermann N, Grimm T, Sehrt JT. Effects of process strategies on the processability of CM247LC in powder bed fusion of metals using a laser beam. Progress in Additive Manufacturing. 2026;11(7):6709-6717. doi:10.1007/s40964-026-01740-6

BibTeX
@article{Kretzer2026,
  author = {Kretzer, Nele and Ostermann, Niklas and Grimm, Tobias and Sehrt, Jan T.},
  title = {Effects of process strategies on the processability of CM247LC in powder bed fusion of metals using a laser beam},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {7},
  pages = {6709--6717},
  doi = {10.1007/s40964-026-01740-6}
}
Kostenlos starten →