Large-format additive manufacturing of biodegradable reinforced TPS/PBAT composite blends
Progress in Additive Manufacturing · 2026-06 · 11 (6) · 5737-5749
DOI: 10.1007/s40964-026-01664-1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 17.04.2026. Verfasst von Rosario Carmenini und 6 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad de Cadiz.
Abstract (Originalsprache)
The increasing demand for sustainable materials in additive manufacturing (AM) has prompted the development of biodegradable composite blends suitable for large-format fused granular fabrication (LF-FGF). In this study, novel thermoplastic formulations based on thermoplastic starch (TPS), poly(butylene adipate-co-terephthalate) (PBAT) and calcium carbonate (CaCO3) were engineered and evaluated for printability, thermal stability, and mechanical performance. Two optimized formulations with different inorganic content (F1 and F2) were prepared via twin-screw extrusion using commercial masterbatches and characterized in terms of their starch, polymer, plasticizer, and filler contents. Spectroscopic and thermal analyses confirmed the structural integrity of all components post-extrusion. DSC and melt flow rate measurements revealed thermally stable processing windows (100–150 °C) and good flow behaviour suitable for LF-FGF. Both formulations were processed via injection moulding and LF-FGF, and mechanical testing was conducted on printed parts in two build orientations. F1 displayed superior toughness and dimensional fidelity, while F2 achieved the highest stiffness (E ≈ 300 MPa) due to higher CaCO3 content. Notably, F1 printed in the XY direction outperformed its injection-moulded counterpart in tensile strength, highlighting the advantage of layer-wise thermal relaxation in LF-FGF. A prototype latticework to separate spaces measuring 100 × 50 cm was successfully fabricated as a proof-of-concept. These results demonstrate the potential of tailored biodegradable TPS/PBAT/CaCO3 blends for scalable, sustainable manufacturing of large custom objects using pellet-based AM.
Förderung
- Universidad de Cadiz
Zitieren
APA
Carmenini, R., Pintos, P. B., Leon, A. S. D., Sambri, L., Molina, S. I., Maturi, M., & Franchini, M. C. (2026). Large-format additive manufacturing of biodegradable reinforced TPS/PBAT composite blends. Progress in Additive Manufacturing, 11(6), 5737-5749. https://doi.org/10.1007/s40964-026-01664-1
Vancouver
Carmenini R, Pintos PB, Leon ASD, Sambri L, Molina SI, Maturi M, et al. Large-format additive manufacturing of biodegradable reinforced TPS/PBAT composite blends. Progress in Additive Manufacturing. 2026;11(6):5737-5749. doi:10.1007/s40964-026-01664-1
BibTeX
@article{Carmenini2026,
author = {Carmenini, Rosario and Pintos, Pedro Burgos and Leon, Alberto Sanz de and Sambri, Letizia and Molina, Sergio Ignacio and Maturi, Mirko and Franchini, Mauro Comes},
title = {Large-format additive manufacturing of biodegradable reinforced TPS/PBAT composite blends},
journal = {Progress in Additive Manufacturing},
year = {2026},
volume = {11},
number = {6},
pages = {5737--5749},
doi = {10.1007/s40964-026-01664-1}
}
EUVIMED