EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

SS316L, AlSi10Mg and NiTi highly deformable structures manufactured through laser powder bed fusion

Simone Bonati, Nicola Bennato, Adelaide Nespoli

Progress in Additive Manufacturing · 2026-05 · 11 (5) · 4933-4948

DOI: 10.1007/s40964-026-01635-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 20.03.2026. Verfasst von Simone Bonati und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Consiglio Nazionale Delle Ricerche.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work introduces a thin-walled, modular flexible structure, the Highly Deformable Structure (HDS), specifically engineered to exhibit bending-dominated behavior and a deployable mechanism, enabling large deformations, high energy absorption, and superior flexibility. HDS specimens were fabricated through Laser Powder Bed Fusion (LPBF) process using three different materials: SS316L, AlSi10Mg and NiTi. The study combined morphological analyses and mechanical characterizations to provide a comprehensive assessment of their performance. The results demonstrate that the HDS geometry accommodates significant deformations without structural failure, confirming the robustness of the design. Dynamic analyses conducted at 2 Hz showed that, among the tested alloys, NiTi exhibited the highest damping capacity, with a tanδ of 0.035 at 1% deformation amplitude, at a mean force of 20 N and at 5 °C (corresponding to austenite start temperature A s ). In comparison, SS316L and AlSi10Mg HDS cells also showed excellent dynamic response within the plastic regime at strain below 0.5%. Furthermore, the NiTi-based HDS benefits from shape memory effect, recovering over 50% of the applied deformation, which makes it particularly suitable for impact-resistance applications. These findings highlight the potential of LPBF in developing next-generation metallic components with tunable deformability, enabling advances in load bearing, damping and energy absorbing systems.

Förderung

  • Consiglio Nazionale Delle Ricerche

Zitieren

APA

Bonati, S., Bennato, N., & Nespoli, A. (2026). SS316L, AlSi10Mg and NiTi highly deformable structures manufactured through laser powder bed fusion. Progress in Additive Manufacturing, 11(5), 4933-4948. https://doi.org/10.1007/s40964-026-01635-6

Vancouver

Bonati S, Bennato N, Nespoli A. SS316L, AlSi10Mg and NiTi highly deformable structures manufactured through laser powder bed fusion. Progress in Additive Manufacturing. 2026;11(5):4933-4948. doi:10.1007/s40964-026-01635-6

BibTeX
@article{Bonati2026,
  author = {Bonati, Simone and Bennato, Nicola and Nespoli, Adelaide},
  title = {SS316L, AlSi10Mg and NiTi highly deformable structures manufactured through laser powder bed fusion},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {5},
  pages = {4933--4948},
  doi = {10.1007/s40964-026-01635-6}
}
Kostenlos starten →