Automated in situ monitoring and analysis of process signatures and build profiles during wire arc directed energy deposition
Progress in Additive Manufacturing · 2026-01 · 11 (1) · 39-58
DOI: 10.1007/s40964-025-01333-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 18.09.2025. Verfasst von Prashant Kumar Chaurasia und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Indo-German Science and Technology Centre, Bundesanstalt für Materialforschung und -prüfung (BAM).
Abstract (Originalsprache)
Wire arc directed energy deposition (DED-Arc) is an emerging metal additive manufacturing process to build near-net shaped metallic parts in a layer-by-layer with minimal material wastage. Automated in situ monitoring and fast-responsive analyses of process signatures and deposit profiles during DED-Arc are in ever demand to print dimensionally consistent parts and reduce post-deposition machining. A comprehensive experimental investigation is presented here involving real-time synchronous measurement of arc current, voltage, and the deposit profile using a novel multi-sensor monitoring framework integrated with the DED-Arc set-up. The recorded current–voltage transients are used to estimate the time-averaged arc power, and energy input in real time for an insight of the influence of wire feed rate and printing travel speed on the deposit characteristics. A unique attempt is made to represent the geometric profiles of the single-track deposits in a generalized mathematical form corresponding to a segmented ellipse, which has exhibited the minimum root-mean-square error of 0.03 mm. The dimensional inconsistency of multi-track deposits is evaluated quantitatively in terms of waviness using build profile monitoring and automated estimation, which is found to increase with an increase in step-over ratio and energy input. For the multi-track mild steel deposits, the suitable range of step-over ratio for the minimum surface waviness is observed to lie between 0.6 and 0.65. Collectively, the proposed framework of synchronized process monitoring and real-time analysis provides a pathway to achieve dimensionally consistent and defect-free parts, and highlights the potential for closed-loop control systems for a wider industrial application of DED-Arc.
Förderung
- Indo-German Science and Technology Centre
- Bundesanstalt für Materialforschung und -prüfung (BAM)
Zitieren
APA
Chaurasia, P. K., Fabry, Ç., Pittner, A., De, A., & Rethmeier, M. (2026). Automated in situ monitoring and analysis of process signatures and build profiles during wire arc directed energy deposition. Progress in Additive Manufacturing, 11(1), 39-58. https://doi.org/10.1007/s40964-025-01333-9
Vancouver
Chaurasia PK, Fabry Ç, Pittner A, De A, Rethmeier M. Automated in situ monitoring and analysis of process signatures and build profiles during wire arc directed energy deposition. Progress in Additive Manufacturing. 2026;11(1):39-58. doi:10.1007/s40964-025-01333-9
BibTeX
@article{Chaurasia2026,
author = {Chaurasia, Prashant Kumar and Fabry, Çağtay and Pittner, Andreas and De, Amitava and Rethmeier, Michael},
title = {Automated in situ monitoring and analysis of process signatures and build profiles during wire arc directed energy deposition},
journal = {Progress in Additive Manufacturing},
year = {2026},
volume = {11},
number = {1},
pages = {39--58},
doi = {10.1007/s40964-025-01333-9}
}
EUVIMED