EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of graded metallic lattice structures by thick film electroplating of additively manufactured polymer lattices

Marco Noack, Christian Gutzler, Eckhard Kirchner

Progress in Additive Manufacturing · 2025-12 · 10 (12) · 11521-11532

DOI: 10.1007/s40964-025-01300-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 25.08.2025. Verfasst von Marco Noack und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technische Universität Darmstadt.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) of metallic lattice structures enables lightweight, high-performance components for structural and multifunctional applications. However, direct metal AM processes are costly and resource-intensive. This study investigates a hybrid approach that combines the geometric flexibility of polymer AM with the mechanical performance of electroplated metals. Polymer lattice templates with fine features were fabricated via stereolithography and subsequently coated with thick copper layers through a 48-h electroplating process. The resulting hybrid structures achieved a copper mass fraction exceeding 98% and exhibited a relative density of 18.9%, comparable to fully metallic lattice materials. Mechanical testing under uniaxial compression revealed substantial improvements in structural performance: while absolute stiffness and strength increased by up to 500 times compared to the uncoated polymer lattice, the relative density also increased significantly. To account for this, the relative effective modulus, defined as the ratio of relative modulus to relative density, was evaluated, demonstrating a 30-fold improvement through metallization. Failure analysis revealed stretch-dominated deformation and brittle collapse modes, closely resembling those observed in hollow metallic lattices. These results highlight the potential of thick-film electroplating as a scalable and versatile route to fabricate mechanically efficient, predominantly metallic lattice structures. This approach paves the way for multifunctional applications in lightweight and energy-absorbing systems.

Förderung

  • Technische Universität Darmstadt

Zitieren

APA

Noack, M., Gutzler, C., & Kirchner, E. (2025). Investigation of graded metallic lattice structures by thick film electroplating of additively manufactured polymer lattices. Progress in Additive Manufacturing, 10(12), 11521-11532. https://doi.org/10.1007/s40964-025-01300-4

Vancouver

Noack M, Gutzler C, Kirchner E. Investigation of graded metallic lattice structures by thick film electroplating of additively manufactured polymer lattices. Progress in Additive Manufacturing. 2025;10(12):11521-11532. doi:10.1007/s40964-025-01300-4

BibTeX
@article{Noack2025,
  author = {Noack, Marco and Gutzler, Christian and Kirchner, Eckhard},
  title = {Investigation of graded metallic lattice structures by thick film electroplating of additively manufactured polymer lattices},
  journal = {Progress in Additive Manufacturing},
  year = {2025},
  volume = {10},
  number = {12},
  pages = {11521--11532},
  doi = {10.1007/s40964-025-01300-4}
}
Kostenlos starten →