Enhancing the energy absorption of AlSi10Mg thin-walled tubes with internal lattice structure through laser powder bed fusion
Progress in Additive Manufacturing · 2025-10 · 10 (10) · 8557-8576
DOI: 10.1007/s40964-025-01137-x ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 23.05.2025. Verfasst von David Downing und 9 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Melbourne Institute of Technology.
Abstract (Originalsprache)
Heat-treated aluminium thin-walled tubes combine efficient energy absorptive properties with low weight, making them common engineering structures for impact mitigation. Recently, the integration of foam cores within these structures further increases their energy absorption capabilities, however, these foams are stochastic leading to unpredictable failure response and negligible load-bearing enhancements. This study instead integrates a heat-treated aluminium alloy (AlSi10Mg) strut-based lattice structure as the cores for thin-walled tubes through the additive manufacturing process of laser powder bed fusion. Fabricated for lattice relative densities between 10–20% the lattice reinforced thin-walled tubes observe a specific energy absorption increase by up to 223% from standard AlSi10Mg thin-walled tubes. Numerical modelling and experimental testing both confirm the excellent energy absorption of the proposed structures.
Förderung
- Royal Melbourne Institute of Technology
Zitieren
APA
Downing, D., Maconachie, T., Khorasani, M., Noronha, J., Easton, M., Dash, J., Lu, G., Ruan, D., Brandt, M., & Leary, M. (2025). Enhancing the energy absorption of AlSi10Mg thin-walled tubes with internal lattice structure through laser powder bed fusion. Progress in Additive Manufacturing, 10(10), 8557-8576. https://doi.org/10.1007/s40964-025-01137-x
Vancouver
Downing D, Maconachie T, Khorasani M, Noronha J, Easton M, Dash J, et al. Enhancing the energy absorption of AlSi10Mg thin-walled tubes with internal lattice structure through laser powder bed fusion. Progress in Additive Manufacturing. 2025;10(10):8557-8576. doi:10.1007/s40964-025-01137-x
BibTeX
@article{Downing2025,
author = {Downing, David and Maconachie, Toby and Khorasani, Mahyar and Noronha, Jordan and Easton, Mark and Dash, Jason and Lu, Guoxing and Ruan, Dong and Brandt, Milan and Leary, Martin},
title = {Enhancing the energy absorption of AlSi10Mg thin-walled tubes with internal lattice structure through laser powder bed fusion},
journal = {Progress in Additive Manufacturing},
year = {2025},
volume = {10},
number = {10},
pages = {8557--8576},
doi = {10.1007/s40964-025-01137-x}
}
EUVIMED