EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materials

Mylene S. Cadete, Tiago E. P. Gomes, Idalina Gonçalves, Victor Neto

Progress in Additive Manufacturing · 2025-01 · 10 (1) · 127-137

DOI: 10.1007/s40964-024-00608-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 11.04.2024. Verfasst von Mylene S. Cadete und 3 weiteren Autor:innen. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade de Aveiro.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Morphing effect control is still a major challenge in 4D-printing of polylactic acid (PLA). In this work, the influence of extrusion-based 3D-printing parameters on PLA-based material morphing was studied. A design of experiments was performed, where 5 factors (printing temperature, bed temperature, printing speed, fan speed, and flow) were explored at 2 levels. Crystallinity and morphing properties of each 3D-printed structure were determined and discussed. The crystallinity rates of the PLA-based specimens ranged from ca. 14% up to ca. 71%. The interaction between bed temperature and printing speed showed a significant impact on PLA-based samples crystallinity, where using these two parameters at their higher levels contributed to producing PLA-based specimens with higher crystallinity. When exposed to an external thermal stimulus of 60 °C, all settings were capable of acquiring a temporary shape and recover between ca. 71% and ca. 99% of the original shape, depending on the configurations the recovery times ranged from 8 to 50 s. The configuration that resulted in the highest recovery rate was: printing temperature at 220 °C, bed temperature at 40 °C, printing speed at 80 mm/s, fan speed at 0%, and flow at 100%. Regarding recovery time, the configuration of 180 °C for printing temperature, 80 °C for bed temperature, 10 mm/s for printing speed, 100% for fan speed and 150% for flow resulted in the longest recovery time. Overall, the experimental results clearly showed that the parameters of extrusion-based 3D-printing influence the crystallinity and transformability of PLA-based materials.

Förderung

  • Universidade de Aveiro

Zitieren

APA

Cadete, M. S., Gomes, T. E. P., Gonçalves, I., & Neto, V. (2025). Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materials. Progress in Additive Manufacturing, 10(1), 127-137. https://doi.org/10.1007/s40964-024-00608-x

Vancouver

Cadete MS, Gomes TEP, Gonçalves I, Neto V. Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materials. Progress in Additive Manufacturing. 2025;10(1):127-137. doi:10.1007/s40964-024-00608-x

BibTeX
@article{Cadete2025,
  author = {Cadete, Mylene S. and Gomes, Tiago E. P. and Gonçalves, Idalina and Neto, Victor},
  title = {Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materials},
  journal = {Progress in Additive Manufacturing},
  year = {2025},
  volume = {10},
  number = {1},
  pages = {127--137},
  doi = {10.1007/s40964-024-00608-x}
}
Kostenlos starten →