EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of fatigue lifetime and fatigue limit of aluminum parts produced by PBF-LB/M using a statistical defect distribution

Lea Strauß, Günther Löwisch

Progress in Additive Manufacturing · 2024-10 · 9 (5) · 1299-1308

DOI: 10.1007/s40964-024-00577-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 14.03.2024. Verfasst von Lea Strauß und 1 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: dtec.bw—Digitalization and Technology Research Center of the Bundeswehr, Universität der Bundeswehr München.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fatigue tests were performed with samples of AlSi10Mg produced by PBF-LB/M. The failure is caused by inhomogeneities nearby or at the surface of the samples. Therefore, the fatigue strength depends on the crack growth behavior at inhomogeneities under the local stress state at the surface, including residual stresses. For a given size of the failure-causing inhomogeneity, the fatigue lifetime can be described using a crack growth law proposed by Murakami et al. The fatigue limit is given by the threshold value of fatigue crack growth according to the approach of El Haddad. Knowing the distribution of the maximum value of inhomogeneity size in a specimen, it is possible to estimate the S–N curve for 10%, 50%, and 90% crack probability.

Förderung

  • dtec.bw—Digitalization and Technology Research Center of the Bundeswehr
  • Universität der Bundeswehr München

Zitieren

APA

Strauß, L., & Löwisch, G. (2024). Prediction of fatigue lifetime and fatigue limit of aluminum parts produced by PBF-LB/M using a statistical defect distribution. Progress in Additive Manufacturing, 9(5), 1299-1308. https://doi.org/10.1007/s40964-024-00577-1

Vancouver

Strauß L, Löwisch G. Prediction of fatigue lifetime and fatigue limit of aluminum parts produced by PBF-LB/M using a statistical defect distribution. Progress in Additive Manufacturing. 2024;9(5):1299-1308. doi:10.1007/s40964-024-00577-1

BibTeX
@article{Strau2024,
  author = {Strauß, Lea and Löwisch, Günther},
  title = {Prediction of fatigue lifetime and fatigue limit of aluminum parts produced by PBF-LB/M using a statistical defect distribution},
  journal = {Progress in Additive Manufacturing},
  year = {2024},
  volume = {9},
  number = {5},
  pages = {1299--1308},
  doi = {10.1007/s40964-024-00577-1}
}
Kostenlos starten →