High conductive copper alloys for additive manufacturing
Progress in Additive Manufacturing · 2024-12 · 9 (6) · 1643-1652
DOI: 10.1007/s40964-023-00527-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 31.10.2023. Verfasst von T. Fiedler und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technische Universität Braunschweig.
Abstract (Originalsprache)
For applications where high thermal and/or electrical conductivity combined with reasonably high strength is required, copper alloys may be used. Although many different alloys were already developed in the past, additive manufacturing like laser powder bed fusion (PBF-LB/M) opens up new possibilities for alloy development, mainly driven by the very high cooling rates. This allows for the usage of precipitation-hardened alloys with compositions exceeding the maximum solubility. The present work focuses on the investigation of a well-known CuCr1Zr alloy as well as CuZr alloys with 1 and 2 wt.% Zr. For a fast, resource-efficient screening and demonstration of feasibility, the investigated alloys were not printed from powder. Instead, solid sheets were partially re-melted in a PBF-LB/M machine to obtain a microstructure similar to the printed state. This rapid-solidification microstructure is investigated, and precipitates with a size 50 nm or even smaller are found. After subsequent aging heat treatments, the hardness of the alloys exceeds the maximum hardness achievable with conventional manufacturing methods (excluding work hardening). The investigations in this work revealed the great hardening potential of these alloys for usage in the PBF-LB/M process.
Förderung
- Technische Universität Braunschweig
Zitieren
APA
Fiedler, T., Domingues, M. J., Winter, C., & Rösler, J. (2024). High conductive copper alloys for additive manufacturing. Progress in Additive Manufacturing, 9(6), 1643-1652. https://doi.org/10.1007/s40964-023-00527-3
Vancouver
Fiedler T, Domingues MJ, Winter C, Rösler J. High conductive copper alloys for additive manufacturing. Progress in Additive Manufacturing. 2024;9(6):1643-1652. doi:10.1007/s40964-023-00527-3
BibTeX
@article{Fiedler2024,
author = {Fiedler, T. and Domingues, M. Jähnig and Winter, C. and Rösler, J.},
title = {High conductive copper alloys for additive manufacturing},
journal = {Progress in Additive Manufacturing},
year = {2024},
volume = {9},
number = {6},
pages = {1643--1652},
doi = {10.1007/s40964-023-00527-3}
}
EUVIMED