EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Sand Properties on Core Production Quality and Performance

Alain Dugu, Jessica Elfsberg, Mattias Kindsdet, Tomas Nilsson, Isak Hollinger, Dinesh Sundaram, Attila Diószegi

International Journal of Metalcasting · 16.07.2026

DOI: 10.1007/s40962-026-02072-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Metalcasting, online erschienen am 16.07.2026. Verfasst von Alain Dugu und 6 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VINNOVA, Scania, Rise.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examined the chemical and mechanical behaviour of fresh silica sand, green sand-related materials, and mechanically reclaimed sand used in cold-box core production. The work was conducted in the context of sand regeneration in an automotive foundry producing cast iron components. Reclaimed sand was collected from a defined point in the mechanical regeneration cycle after attrition and dedusting. The sand was then analysed by pH and electrical conductivity measurements to evaluate remaining contamination. The finest reclaimed fractions showed the highest pH and conductivity, which indicates that alkaline residues and dissolved ions were concentrated in the small-grain portion. Comparison between fresh sand, green sand mixtures, and reclaimed sand showed that the reclaimed material behaved chemically like a fresh sand mixture containing up to about 10% green sand residue. When the share of reclaimed sand increased, pH and conductivity increased, and the 1-hour bending strength decreased. These results show that the chemical condition of reclaimed sand, especially its fine fraction, has a direct effect on final core strength. Regular monitoring of reclaimed sand chemistry is, therefore, important for stable cold-box production and consistent core quality.

Förderung

  • VINNOVA
  • Scania
  • Rise
  • Jönköping University

Zitieren

APA

Dugu, A., Elfsberg, J., Kindsdet, M., Nilsson, T., Hollinger, I., Sundaram, D., & Diószegi, A. (2026). Influence of Sand Properties on Core Production Quality and Performance. International Journal of Metalcasting. https://doi.org/10.1007/s40962-026-02072-5

Vancouver

Dugu A, Elfsberg J, Kindsdet M, Nilsson T, Hollinger I, Sundaram D, et al. Influence of Sand Properties on Core Production Quality and Performance. International Journal of Metalcasting. 2026. doi:10.1007/s40962-026-02072-5

BibTeX
@article{Dugu2026,
  author = {Dugu, Alain and Elfsberg, Jessica and Kindsdet, Mattias and Nilsson, Tomas and Hollinger, Isak and Sundaram, Dinesh and Diószegi, Attila},
  title = {Influence of Sand Properties on Core Production Quality and Performance},
  journal = {International Journal of Metalcasting},
  year = {2026},
  doi = {10.1007/s40962-026-02072-5}
}
Kostenlos starten →