EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessing the Use of 3D Printed Patterns for Use in Investment Casting

Amal D. Wooldridge, Alan Druschitz

International Journal of Metalcasting · 01.04.2026

DOI: 10.1007/s40962-026-01948-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Metalcasting, online erschienen am 01.04.2026. Verfasst von Amal D. Wooldridge und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundry Educational Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Foundries commonly use wax to create patterns for investment casting. Wax use can lead to material waste and increase the time needed to produce parts, as wax patterns frequently need to be corrected, often by hand. Utilizing 3D printed patterns offers the opportunity to increase the precision of castings as well as reduce material waste, especially within smaller scale operations with custom patterns. Two filaments, polylactic acid (PLA) and PolyCast, were compared. For this investigation, four patterns of differing shape and infill were printed using both filaments. Using the shell method of investment casting, a ceramic mold was created from the patterns. These molds were sintered and poured using gray iron. Throughout this process, the molds and final casting were observed to assess the differences between each type of filament and their viability for investment casting, with less damage observed on the PolyCast molds once the pattern was burned out.

Förderung

  • Foundry Educational Foundation

Zitieren

APA

Wooldridge, A. D., & Druschitz, A. (2026). Assessing the Use of 3D Printed Patterns for Use in Investment Casting. International Journal of Metalcasting. https://doi.org/10.1007/s40962-026-01948-w

Vancouver

Wooldridge AD, Druschitz A. Assessing the Use of 3D Printed Patterns for Use in Investment Casting. International Journal of Metalcasting. 2026. doi:10.1007/s40962-026-01948-w

BibTeX
@article{Wooldridge2026,
  author = {Wooldridge, Amal D. and Druschitz, Alan},
  title = {Assessing the Use of 3D Printed Patterns for Use in Investment Casting},
  journal = {International Journal of Metalcasting},
  year = {2026},
  doi = {10.1007/s40962-026-01948-w}
}
Kostenlos starten →