EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the Effects of Filling Speed, Casting Temperature and Metallurgical Quality on Fluidity of Lamellar Graphite Cast Iron at Different Section Thicknesses

Sami Köse, Murat Çolak, Ebru Emine Şüküroğlu

International Journal of Metalcasting · 2025-01 · 19 (1) · 282-292

DOI: 10.1007/s40962-024-01301-z ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Metalcasting, online erschienen am 17.03.2024. Verfasst von Sami Köse und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bayburt University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the fluidity properties of the alloy were investigated at different casting temperatures, different section thicknesses, and varying casting parameters of lamellar graphite cast iron materials. To achieve our goal, we utilized sand molds that were created with specific parameters including pouring temperature, metallurgical quality, section thickness, and fluidity test model. These molds were used for casting. Thus, the effect of fluidity properties in changing casting conditions and liquid metal advance distances at determined section thicknesses was investigated. Modeling was carried out with FlowCast casting simulation software by determining the liquid metal advance distance depending on the section thickness in the castings made in sand molds under changing casting conditions. The fluidity and advance distance of the liquid metal was determined comparatively with experimental and modeling techniques under the changing casting conditions in the parameters determined in this study. When the outcomes were examined; it was observed that different liquid metal advance distances occur at different cross-section thicknesses depending on the changing conditions.

Förderung

  • Bayburt University

Zitieren

APA

Köse, S., Çolak, M., & Şüküroğlu, E. E. (2025). Investigation of the Effects of Filling Speed, Casting Temperature and Metallurgical Quality on Fluidity of Lamellar Graphite Cast Iron at Different Section Thicknesses. International Journal of Metalcasting, 19(1), 282-292. https://doi.org/10.1007/s40962-024-01301-z

Vancouver

Köse S, Çolak M, Şüküroğlu EE. Investigation of the Effects of Filling Speed, Casting Temperature and Metallurgical Quality on Fluidity of Lamellar Graphite Cast Iron at Different Section Thicknesses. International Journal of Metalcasting. 2025;19(1):282-292. doi:10.1007/s40962-024-01301-z

BibTeX
@article{Kse2025,
  author = {Köse, Sami and Çolak, Murat and Şüküroğlu, Ebru Emine},
  title = {Investigation of the Effects of Filling Speed, Casting Temperature and Metallurgical Quality on Fluidity of Lamellar Graphite Cast Iron at Different Section Thicknesses},
  journal = {International Journal of Metalcasting},
  year = {2025},
  volume = {19},
  number = {1},
  pages = {282--292},
  doi = {10.1007/s40962-024-01301-z}
}
Kostenlos starten →