EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Numerical investigation of strength and micro-cracking behavior of anisotropic sandstone under true triaxial stress

Dang Gao, Jun Peng, Zaobao Liu, Xin Wang, Hanglong Wang

Geomechanics and Geophysics for Geo-Energy and Geo-Resources · 2026-12 · 12 (1)

DOI: 10.1007/s40948-026-01161-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Geomechanics and Geophysics for Geo-Energy and Geo-Resources, online erschienen am 03.06.2026. Verfasst von Dang Gao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Key Research and Development Plan, Key Project of National Natural Science Foundation of China, Natural Science Foundation of Anhui Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anisotropy is a common behavior of bedded rock in underground engineering. Evaluating the influence of bedding plane on both mechanical property and failure behavior of anisotropic rock under true triaxial stress is of great importance. In this study, a comprehensive numerical investigation is conducted utilizing a three-dimensional discrete element method to explore how minimum principal stress, intermediate principal stress, and inclination angle of the bedding plane affect the deformation and strength properties, failure pattern, and associated micro-cracking process in anisotropic rock. True triaxial simulations on a numerical model possessing seven different bedding plane inclination angles are conducted under various stress conditions. The results reveal that the peak strength and failure mode are governed by the coupled effects of principal stresses and bedding plane inclination. A U-shaped strength variation with inclination angle is observed under low differential stress and the trend gradually diminishes as differential stress increases. The failure plane changes from bedding-controlled to intermediate-principal-stress-controlled with increasing differential stress. Micro-cracking analysis further elucidates the underlying mechanisms driving these macroscopic behaviors. Brittle behavior peaks at high stress or medium inclination angle. U-shaped strength variation diminishes with increasing differential stress. Failure plane changes from bedding-parallel to σ2-parallel with increasing differential stress. Cracking anisotropy is controlled by stress state and bedding plane inclination. Brittle behavior peaks at high stress or medium inclination angle. U-shaped strength variation diminishes with increasing differential stress. Failure plane changes from bedding-parallel to σ2-parallel with increasing differential stress. Cracking anisotropy is controlled by stress state and bedding plane inclination.

Förderung

  • National Key Research and Development Plan
  • Key Project of National Natural Science Foundation of China
  • Natural Science Foundation of Anhui Province
  • Key Research and Development Plan of Anhui Province

Zitieren

APA

Gao, D., Peng, J., Liu, Z., Wang, X., & Wang, H. (2026). Numerical investigation of strength and micro-cracking behavior of anisotropic sandstone under true triaxial stress. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 12(1). https://doi.org/10.1007/s40948-026-01161-3

Vancouver

Gao D, Peng J, Liu Z, Wang X, Wang H. Numerical investigation of strength and micro-cracking behavior of anisotropic sandstone under true triaxial stress. Geomechanics and Geophysics for Geo-Energy and Geo-Resources. 2026;12(1). doi:10.1007/s40948-026-01161-3

BibTeX
@article{Gao2026,
  author = {Gao, Dang and Peng, Jun and Liu, Zaobao and Wang, Xin and Wang, Hanglong},
  title = {Numerical investigation of strength and micro-cracking behavior of anisotropic sandstone under true triaxial stress},
  journal = {Geomechanics and Geophysics for Geo-Energy and Geo-Resources},
  year = {2026},
  volume = {12},
  number = {1},
  doi = {10.1007/s40948-026-01161-3}
}
Kostenlos starten →