EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Utilization of aluminate cement-fly ash binary binder for mine backfilling materials: experimental testing and DEM modeling

Zhenghan Qin, Yong Yuan, Zhengtian Yan, Zhenbin Mao, Ziang Zhang, Bo Li

Geomechanics and Geophysics for Geo-Energy and Geo-Resources · 2026-12 · 12 (1)

DOI: 10.1007/s40948-026-01145-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Geomechanics and Geophysics for Geo-Energy and Geo-Resources, online erschienen am 05.05.2026. Verfasst von Zhenghan Qin und 5 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional OPC-based mine backfills face challenges of high carbon emissions and slow early-strength gain, while mine solid wastes pose environmental risks. This study developed an alkali-activated aluminate cement-fly ash (AC-FA) binder (ACCM) to bridge this gap, focusing on fabricating high-performance composite stone cemented bodies (CSCB). The primary objective was to optimize the mix design for structural backfill applications. Using Principal Component Analysis (PCA) and Response Surface Methodology (RSM), three key parameters—water-cement ratio, fly ash content, and alkali content—were evaluated. Based on PCA weights for strength, setting time, and viscosity, the optimal mix was determined as: water-cement ratio of 0.6, fly ash content of 3.8%, and alkali content of 1.5%. Microstructural analysis (SEM–EDS) confirmed that matrix densification and C-(A)-S-H gel formation shifted the mechanical behavior from plastic to brittle. Additionally, a discrete element model (DEM) using 3D-scanned flexible clusters in PFC3D was developed. By implementing a 0.6 reduction factor for the Interface Transition Zone (ITZ) properties, the model accurately captured the experimental stress–strain curves and interfacial debonding failure. These findings provide a robust framework for high-strength, eco-friendly mine backfill design, promoting the high-value utilization of industrial solid wastes.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Qin, Z., Yuan, Y., Yan, Z., Mao, Z., Zhang, Z., & Li, B. (2026). Utilization of aluminate cement-fly ash binary binder for mine backfilling materials: experimental testing and DEM modeling. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 12(1). https://doi.org/10.1007/s40948-026-01145-3

Vancouver

Qin Z, Yuan Y, Yan Z, Mao Z, Zhang Z, Li B. Utilization of aluminate cement-fly ash binary binder for mine backfilling materials: experimental testing and DEM modeling. Geomechanics and Geophysics for Geo-Energy and Geo-Resources. 2026;12(1). doi:10.1007/s40948-026-01145-3

BibTeX
@article{Qin2026,
  author = {Qin, Zhenghan and Yuan, Yong and Yan, Zhengtian and Mao, Zhenbin and Zhang, Ziang and Li, Bo},
  title = {Utilization of aluminate cement-fly ash binary binder for mine backfilling materials: experimental testing and DEM modeling},
  journal = {Geomechanics and Geophysics for Geo-Energy and Geo-Resources},
  year = {2026},
  volume = {12},
  number = {1},
  doi = {10.1007/s40948-026-01145-3}
}
Kostenlos starten →