EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimized aerogel-filled glass bricks with repurposed aged flat glass

Michal Ganobjak, Jannis Wernery, Wim J. Malfait, Vlad-Alexandru Silvestru

Glass Structures & Engineering · 2026-12 · 11 (3)

DOI: 10.1007/s40940-026-00342-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Glass Structures & Engineering, online erschienen am 13.11.2026. Verfasst von Michal Ganobjak und 3 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BNF National qualification programme, Velux Stiftung, Swiss Federal Institute of Technology Zurich.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel type of glass brick, made from two packages of laminated annealed flat glass and a relatively deep cavity filled with aerogel granules, provides a balanced solution for meeting façade requirements related to thermal insulation, privacy and light transmission. Preliminary investigations on the structural performance of the prototype brick under thermal cycles highlighted the need for optimizing the connection between the plastic spacers defining the cavity depth, and the laminated glass. Moreover, it was recognized that this translucent glass brick would be a suitable application case for repurposing aged flat glass, even such with visible surface damages being eventually acceptable. This paper presents investigations on optimizing the assembly of the glass brick prototype for improved structural performance under thermal cycles. Tensile tests were performed on glass plates bonded by silicone adhesive joints to epoxy resin and polycarbonate blocks as spacer materials. Samples subjected to thermal cycles between − 25 °C and + 80 °C, and reference samples without undergoing thermal cycles were tested. All three investigated silicone adhesives showed worse adhesion on the polycarbonate substrates compared to the epoxy resin substrates. Additionally, repurposing aged flat glass for the glass bricks was evaluated, by developing a prototype and conducting preliminary experimental investigations on laminating aged flat glass by vacuum bag lamination. Finally, thermal simulations were conducted, showing that walls built with the optimized glass bricks can reach a U-value of 0.32 W/(m 2 ·K).

Förderung

  • BNF National qualification programme
  • Velux Stiftung
  • Swiss Federal Institute of Technology Zurich

Zitieren

APA

Ganobjak, M., Wernery, J., Malfait, W. J., & Silvestru, V. (2026). Optimized aerogel-filled glass bricks with repurposed aged flat glass. Glass Structures & Engineering, 11(3). https://doi.org/10.1007/s40940-026-00342-6

Vancouver

Ganobjak M, Wernery J, Malfait WJ, Silvestru V. Optimized aerogel-filled glass bricks with repurposed aged flat glass. Glass Structures & Engineering. 2026;11(3). doi:10.1007/s40940-026-00342-6

BibTeX
@article{Ganobjak2026,
  author = {Ganobjak, Michal and Wernery, Jannis and Malfait, Wim J. and Silvestru, Vlad-Alexandru},
  title = {Optimized aerogel-filled glass bricks with repurposed aged flat glass},
  journal = {Glass Structures & Engineering},
  year = {2026},
  volume = {11},
  number = {3},
  doi = {10.1007/s40940-026-00342-6}
}
Kostenlos starten →