Additive manufacturing of interlocking glass masonry units
Glass Structures & Engineering · 2024-12 · 9 (3-4) · 397-417
DOI: 10.1007/s40940-024-00279-8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Glass Structures & Engineering, online erschienen am 16.09.2024. Verfasst von Daniel Massimino und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Professor Amar G. Bose Research Grant Program, MIT Research Support Committee.
Abstract (Originalsprache)
In comparison to traditional glass casting, glass additive manufacturing (AM) presents an opportunity to increase design flexibility and reduce tooling costs for the production of highly variable geometries. While the latter has been extensively explored for masonry units, there is minimal research on the former for its viability to produce structural building components. This paper encompasses design, manufacturing, and experimental testing to assess the feasibility of using glass AM to produce interlocking masonry units for the construction industry. The glass 3D printer employed in this study is capable of printing a maximum volume of 32.5 $$\times $$ × 32.5 $$\times $$ × 38 cm–suitable for producing full-size masonry units. As part of this work, we discuss how to adapt design guidelines for glass AM to produce interlocking units. To evaluate fabrication ease and structural performance, three fabrication methods, Fully Hollow, Print-Cast, and Fully Printed, are compared. To compare the accuracy, repeatability, and structural capacity of each masonry unit, geometric analysis, surface roughness, and mechanical testing is conducted. Results varied by fabrication method, with average strength ranging from 3.64 $$-$$ - 42.3 MPa for initial fracture and 64.0–118 MPa for ultimate strength. Accuracy in print dimensions was less than 1 mm with a standard deviation of 0.14–1.6 mm. Results demonstrated that Fully Hollow masonry units provide a more immediate path to implementation, while Fully Printed units have the potential to provide an entirely glass, transparent, and circular building component fabrication method.
Förderung
- The Professor Amar G. Bose Research Grant Program
- MIT Research Support Committee
Zitieren
APA
Massimino, D., Townsend, E., Folinus, C., Stern, M., & Becker, K. (2024). Additive manufacturing of interlocking glass masonry units. Glass Structures & Engineering, 9(3-4), 397-417. https://doi.org/10.1007/s40940-024-00279-8
Vancouver
Massimino D, Townsend E, Folinus C, Stern M, Becker K. Additive manufacturing of interlocking glass masonry units. Glass Structures & Engineering. 2024;9(3-4):397-417. doi:10.1007/s40940-024-00279-8
BibTeX
@article{Massimino2024,
author = {Massimino, Daniel and Townsend, Ethan and Folinus, Charlotte and Stern, Michael and Becker, Kaitlyn},
title = {Additive manufacturing of interlocking glass masonry units},
journal = {Glass Structures & Engineering},
year = {2024},
volume = {9},
number = {3-4},
pages = {397--417},
doi = {10.1007/s40940-024-00279-8}
}
EUVIMED