EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fayalitic Minerals and Slags (Part II): Physical Properties and Metal Distribution Simulation

Joao Weiss, Daniel Munchen, Hugo Lucas, Bernd Friedrich

Journal of Sustainable Metallurgy · 2026-06 · 12 (3) · 2741-2756

DOI: 10.1007/s40831-026-01461-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Sustainable Metallurgy, online erschienen am 16.03.2026. Verfasst von Joao Weiss und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, RWTH Aachen University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The interaction between fayalitic slags and nonferrous metals during smelting presents a multifaceted challenge that necessitates comprehensive investigation to enhance metallurgical processes toward the recovery of valuable metals. This study builds on the literature review of the composition and mineralogy of fayalitic slags (Part I), examining the effect of these composition on thermodynamic and physical properties, which were generated through thermochemical simulations using available databases and known studies. The findings and models created have shown that small changes in composition have significant effects on properties. For each property studied an equation was derived from the model to summarize and simplify complex calculations. Differences between predicted values and experimental results were also commented. Melting temperature, for example, increases mainly with the CaO content increase, reaching up to 1600 °C. On the other hand, SiO 2 content increase plays a more significant role in the increase of viscosity, where values of up to 3 Pa·s were observed. Meanwhile, the FeO content increase has shown significant effect on density, up to 3.4 g·cm −3 . The addition of secondary compounds (fluxes) such as Al 2 O 3 , MgO, and Fe 2 O 3 have also influenced the melting temperature, viscosity, and density of fayalitic slags, with 9 mass% Al 2 O 3 notably expanding the low-viscosity area between 0.1 and 1 Pa·s and altering density ranges, while Fe 2 O 3 effectively reduces viscosity more than CaO. The combination of these compounds further modify the properties, enhancing the potential for targeted mineral enrichment in fayalitic slags. The study demonstrates how slag composition adjustments can lower melting temperatures and viscosity, while reducing the heat input and energy needs. Regression models enable efficient fayalitic slags designs aligned with sustainable goals, thereby reducing overall carbon footprint, facilitating slag reprocessing for metal extraction, minimizing waste, and environmental impact. Graphical Abstract

Förderung

  • Deutsche Forschungsgemeinschaft
  • RWTH Aachen University

Zitieren

APA

Weiss, J., Munchen, D., Lucas, H., & Friedrich, B. (2026). Fayalitic Minerals and Slags (Part II): Physical Properties and Metal Distribution Simulation. Journal of Sustainable Metallurgy, 12(3), 2741-2756. https://doi.org/10.1007/s40831-026-01461-8

Vancouver

Weiss J, Munchen D, Lucas H, Friedrich B. Fayalitic Minerals and Slags (Part II): Physical Properties and Metal Distribution Simulation. Journal of Sustainable Metallurgy. 2026;12(3):2741-2756. doi:10.1007/s40831-026-01461-8

BibTeX
@article{Weiss2026,
  author = {Weiss, Joao and Munchen, Daniel and Lucas, Hugo and Friedrich, Bernd},
  title = {Fayalitic Minerals and Slags (Part II): Physical Properties and Metal Distribution Simulation},
  journal = {Journal of Sustainable Metallurgy},
  year = {2026},
  volume = {12},
  number = {3},
  pages = {2741--2756},
  doi = {10.1007/s40831-026-01461-8}
}
Kostenlos starten →