EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Conversion of Lithium Chloride into Lithium Hydroxide Using a Two-Step Solvent Extraction Process in an Agitated Kühni Column

Nand Peeters, Sofía Riaño, Koen Binnemans

Journal of Sustainable Metallurgy · 2024-06 · 10 (2) · 637-645

DOI: 10.1007/s40831-024-00815-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Sustainable Metallurgy, online erschienen am 08.04.2024. Verfasst von Nand Peeters und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation Flanders, ERA-NET Cofund on Raw Materials.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A significant consequence of the green transition is the growing demand of lithium-ion batteries (LIBs), as they are essential for electrical vehicles. In turn, the demand for the raw materials that are needed to produce LIBs is increasing. A common LIB cathode type for electrical cars is lithium nickel manganese cobalt oxide (NMC). Since cobalt is currently considered as a critical raw material, nickel-rich NMC cathodes are now designed with lower cobalt contents. The synthesis of these new NMC types requires LiOH instead of Li 2 CO 3 , which was used for Co-richer NMC materials in the past. Most production routes of LiOH start from Li 2 CO 3 or Li 2 SO 4 . However, LiCl could also be a potential precursor for LiOH, as it could be obtained from various lithium sources. A two-step solvent extraction process (SX) was developed for direct conversion of LiCl into LiOH, using a phenol (butylhydroxytoluene or BHT) and a mixture of quaternary ammonium chlorides (Aliquat 336) in an aliphatic diluent (Shellsol D70) as the solvent. The SX process was validated in counter-current mode using a rotary agitated Kühni extraction column. The use of a column instead of mixer-settlers reduced the CO 2 uptake by the final product (LiOH), which prevented the partial conversion of LiOH to Li 2 CO 3 . A total of 75 L of LiCl feed solution was processed in the Kühni column to obtain a solution of LiOH with a final purity of more than 99.95%, at a yield of 96%. Graphical Abstract

Förderung

  • Research Foundation Flanders
  • ERA-NET Cofund on Raw Materials

Zitieren

APA

Peeters, N., Riaño, S., & Binnemans, K. (2024). Conversion of Lithium Chloride into Lithium Hydroxide Using a Two-Step Solvent Extraction Process in an Agitated Kühni Column. Journal of Sustainable Metallurgy, 10(2), 637-645. https://doi.org/10.1007/s40831-024-00815-4

Vancouver

Peeters N, Riaño S, Binnemans K. Conversion of Lithium Chloride into Lithium Hydroxide Using a Two-Step Solvent Extraction Process in an Agitated Kühni Column. Journal of Sustainable Metallurgy. 2024;10(2):637-645. doi:10.1007/s40831-024-00815-4

BibTeX
@article{Peeters2024,
  author = {Peeters, Nand and Riaño, Sofía and Binnemans, Koen},
  title = {Conversion of Lithium Chloride into Lithium Hydroxide Using a Two-Step Solvent Extraction Process in an Agitated Kühni Column},
  journal = {Journal of Sustainable Metallurgy},
  year = {2024},
  volume = {10},
  number = {2},
  pages = {637--645},
  doi = {10.1007/s40831-024-00815-4}
}
Kostenlos starten →