EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Cu Alloying and Heat Treatment Parameters on NiTi Alloy Phase Stability and Constitutive Behavior

S. Cai, J. E. Schaffer, T. Shi, J. Gao, L. Kadeřávek

Shape Memory and Superelasticity · 2024-12 · 10 (4) · 460-472

DOI: 10.1007/s40830-024-00504-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift Shape Memory and Superelasticity, online erschienen am 10.10.2024. Verfasst von S. Cai und 4 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute of Physics of the Czech Academy of Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

NiTiCu alloys with Cu-content up to 20 at.% were successfully made into fine wire with cold-drawn area reduction of 70%. These materials were heat treated and tested at different conditions to study phase transformation and constitutive behavior. It is found that: (1) At Cu-content less than 7.5 at.%, increasing Cu stabilizes the B2 austenite, suppresses R-phase, and slightly decreases B19’ transformation temperatures. At higher level, Cu suppresses B19’-phase, but promotes B19 martensitic phase. (2) Increasing Cu decreases thermal temperature hysteresis and lattice strains during phase transformation. (3) The effect of Cu on stress hysteresis depends on test conditions. A continuous increase in Cu does not guarantee a continuously decreased stress hysteresis. (4) Heat treatment affects Ti 2 (Ni,Cu) 3 precipitation. The highest phase transformation temperatures were obtained after annealing at ~ 600 °C. (5) The $${\left\{102\right\}}_{\text{B}19}$$ 102 B 19 and $${\left\{120\right\}}_{\text{B}19}$$ 120 B 19 martensite texture comes from the $${\left\{111\right\}}_{\text{B}2}$$ 111 B 2 austenite texture after phase transformation through {111} and/or {011} martensite twins. These texture patterns explain the relatively short transformation strains and suggest potential for large improvement through processing-induced texture optimization. (6) The combined effects of Cu addition and cold work strengthening largely increase thermal cycling stabilities of NiTiCu alloys and make them promising candidates for actuator applications.

Förderung

  • Institute of Physics of the Czech Academy of Sciences

Zitieren

APA

Cai, S., Schaffer, J. E., Shi, T., Gao, J., & Kadeřávek, L. (2024). Effect of Cu Alloying and Heat Treatment Parameters on NiTi Alloy Phase Stability and Constitutive Behavior. Shape Memory and Superelasticity, 10(4), 460-472. https://doi.org/10.1007/s40830-024-00504-x

Vancouver

Cai S, Schaffer JE, Shi T, Gao J, Kadeřávek L. Effect of Cu Alloying and Heat Treatment Parameters on NiTi Alloy Phase Stability and Constitutive Behavior. Shape Memory and Superelasticity. 2024;10(4):460-472. doi:10.1007/s40830-024-00504-x

BibTeX
@article{Cai2024,
  author = {Cai, S. and Schaffer, J. E. and Shi, T. and Gao, J. and Kadeřávek, L.},
  title = {Effect of Cu Alloying and Heat Treatment Parameters on NiTi Alloy Phase Stability and Constitutive Behavior},
  journal = {Shape Memory and Superelasticity},
  year = {2024},
  volume = {10},
  number = {4},
  pages = {460--472},
  doi = {10.1007/s40830-024-00504-x}
}
Kostenlos starten →