EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Development of Ultra-Lightweight, and High-Strength CFRP Wheels for Automotive Applications

Jae Hoon Kim, Jun Young Choi, Sung Hoon Ahn

International Journal of Precision Engineering and Manufacturing-Green Technology · 13.08.2026

DOI: 10.1007/s40684-026-00920-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Precision Engineering and Manufacturing-Green Technology, online erschienen am 13.08.2026. Verfasst von Jae Hoon Kim und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Seoul National University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design and preliminary evaluation of an ultra-lightweight carbon fiber reinforced polymer (CFRP) wheel prototype fabricated using optimized continuous fiber winding paths. Seven winding-path configurations were first evaluated through compression tests using single trapezoidal specimens. Based on the maximum load and load-to-weight ratio, Path F was selected and applied to a full-scale CFRP wheel prototype. The final prototype weighed 1.6 kg, including the CFRP structure, residual PLA support molds, milled-carbon-fiber bolt-circle region, epoxy resin, and EVA contact layer. The full wheel sustained a maximum static compression load of 7155.9 N and supported a stationary compact vehicle without visible structural failure. The results demonstrate the preliminary feasibility of the proposed CFRP wheel concept under static loading conditions. These results establish a promising foundation for further development and validation of the proposed CFRP wheel under representative automotive loading and environmental conditions.

Förderung

  • Seoul National University

Zitieren

APA

Kim, J. H., Choi, J. Y., & Ahn, S. H. (2026). Design and Development of Ultra-Lightweight, and High-Strength CFRP Wheels for Automotive Applications. International Journal of Precision Engineering and Manufacturing-Green Technology. https://doi.org/10.1007/s40684-026-00920-7

Vancouver

Kim JH, Choi JY, Ahn SH. Design and Development of Ultra-Lightweight, and High-Strength CFRP Wheels for Automotive Applications. International Journal of Precision Engineering and Manufacturing-Green Technology. 2026. doi:10.1007/s40684-026-00920-7

BibTeX
@article{Kim2026,
  author = {Kim, Jae Hoon and Choi, Jun Young and Ahn, Sung Hoon},
  title = {Design and Development of Ultra-Lightweight, and High-Strength CFRP Wheels for Automotive Applications},
  journal = {International Journal of Precision Engineering and Manufacturing-Green Technology},
  year = {2026},
  doi = {10.1007/s40684-026-00920-7}
}
Kostenlos starten →