Comparison of Tool Wear, Surface Morphology, Specific Cutting Energy and Cutting Temperature in Machining of Titanium Alloys Under Hybrid and Green Cooling Strategies
International Journal of Precision Engineering and Manufacturing-Green Technology · 2023-11 · 10 (6) · 1393-1406
DOI: 10.1007/s40684-023-00512-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Precision Engineering and Manufacturing-Green Technology, online erschienen am 20.03.2023. Verfasst von Munish Kumar Gupta und 6 weiteren Autor:innen. Die Arbeit wurde bisher 93-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowym Centrum Nauki.
Abstract (Originalsprache)
Cutting energy must be reduced in order to make machining processes more eco-friendly. More energy was expended for the same amount of material removed, hence a higher specific cutting energy (SCE) implies inefficient material removal. Usually, the type of coolants or lubricants affects the SCE, or the amount of energy needed to cut a given volume of material. Therefore, the present work deals with a study of SCE in the turning of Ti–3Al–2.5V alloy under green cooling strategies. In spite of this, the research effort is also focused on the mechanism of tool wear, surface roughness, and cutting temperature under hybrid cooling, i.e., minimum quantity lubrication (MQL) and cryogenic. The tool wear rate, were explored with tool mapping analysis, and the results were compared with dry, MQL, and liquid nitrogen (LN 2 ) conditions. The tool wear rate analysis claims that the dry condition causes more built up edge (BUE) formation. In addition, the hybrid cooling conditions are helpful in reducing the SCE while machining titanium alloys.
Förderung
- Narodowym Centrum Nauki
Zitieren
APA
Gupta, M. K., Niesłony, P., Korkmaz, M. E., Kuntoğlu, M., Królczyk, G. M., Günay, M., & Sarikaya, M. (2023). Comparison of Tool Wear, Surface Morphology, Specific Cutting Energy and Cutting Temperature in Machining of Titanium Alloys Under Hybrid and Green Cooling Strategies. International Journal of Precision Engineering and Manufacturing-Green Technology, 10(6), 1393-1406. https://doi.org/10.1007/s40684-023-00512-9
Vancouver
Gupta MK, Niesłony P, Korkmaz ME, Kuntoğlu M, Królczyk GM, Günay M, et al. Comparison of Tool Wear, Surface Morphology, Specific Cutting Energy and Cutting Temperature in Machining of Titanium Alloys Under Hybrid and Green Cooling Strategies. International Journal of Precision Engineering and Manufacturing-Green Technology. 2023;10(6):1393-1406. doi:10.1007/s40684-023-00512-9
BibTeX
@article{Gupta2023,
author = {Gupta, Munish Kumar and Niesłony, P. and Korkmaz, Mehmet Erdi and Kuntoğlu, Mustafa and Królczyk, G. M. and Günay, Mustafa and Sarikaya, Murat},
title = {Comparison of Tool Wear, Surface Morphology, Specific Cutting Energy and Cutting Temperature in Machining of Titanium Alloys Under Hybrid and Green Cooling Strategies},
journal = {International Journal of Precision Engineering and Manufacturing-Green Technology},
year = {2023},
volume = {10},
number = {6},
pages = {1393--1406},
doi = {10.1007/s40684-023-00512-9}
}
EUVIMED