Ideal fracture network morphology study of hard rocks after improving cuttability by hydraulic fracturing
Computational Particle Mechanics · 2025-10 · 12 (5) · 2851-2878
DOI: 10.1007/s40571-025-00964-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Computational Particle Mechanics, 2025-10. Verfasst von Wentao Hou und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Funded by the Graduate Innovation Program of China University of Mining and Technology.
Abstract (Originalsprache)
The utilization of hydraulic fracturing technology to create an intricate network of hydraulic fractures in hard rocks to improve its cuttability, subsequently followed by the non-explosive mechanized mining through tunnel boring machines, is poised to emerge as a novel production paradigm for hard rock mines. In this study, a discrete element model of mechanized mining assisted by hydraulic fracturing techniques for hard rock cutting was established, and the evolution characteristics of the peak cutting force (PCF) of rock cutting recorded by drill bit after hydraulic fracturing were explored under various variables. Based on this, the hydraulic fractures recognition system was developed, wherein the hydraulic fractures network was projected onto the X/Y axis. The results demonstrate that the distance between the pressure hole and the top boundary (DT) is an important factor influencing the average cutting force of rock. Furthermore, a significant improvement in cuttability is observed at DT = 50 mm. Among all variables, the angle of guiding groove in double hole (DGA) has the most significant impact on rock cutting. When DGA = 20°, the PCF reaches the lowest value among all variables, and the hydraulic fractures are regarded as the ideal morphology of hydraulic fracture network under all variables. In terms of its longitudinal projection distribution, hydraulic fractures generate a central projection and gradually diminishes to zero pixels on both sides. Horizontally, the hydraulic fracture is distributed all over the horizontal direction of the rock, resulting in a double-peaked projection distribution at the two pressure holes.
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
- Funded by the Graduate Innovation Program of China University of Mining and Technology
- Funded by the Postgraduate Research & Practice Innovation Program of Jiangsu Province
Zitieren
APA
Hou, W., Ma, D., Li, Z., Zhang, J., & Li, Q. (2025). Ideal fracture network morphology study of hard rocks after improving cuttability by hydraulic fracturing. Computational Particle Mechanics, 12(5), 2851-2878. https://doi.org/10.1007/s40571-025-00964-7
Vancouver
Hou W, Ma D, Li Z, Zhang J, Li Q. Ideal fracture network morphology study of hard rocks after improving cuttability by hydraulic fracturing. Computational Particle Mechanics. 2025;12(5):2851-2878. doi:10.1007/s40571-025-00964-7
BibTeX
@article{Hou2025,
author = {Hou, Wentao and Ma, Dan and Li, Zhenhua and Zhang, Jixiong and Li, Qiang},
title = {Ideal fracture network morphology study of hard rocks after improving cuttability by hydraulic fracturing},
journal = {Computational Particle Mechanics},
year = {2025},
volume = {12},
number = {5},
pages = {2851--2878},
doi = {10.1007/s40571-025-00964-7}
}
EUVIMED