Dynamic, thermal, and vibrational analysis of ball bearings with over-skidding behavior
Friction · 2023-04 · 11 (4) · 580-601
DOI: 10.1007/s40544-022-0622-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Friction, online erschienen am 04.07.2022. Verfasst von Shuai Gao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 67-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The term “over-skidding” indicates that the cage rotational speed ratio exceeds the theoretical value as ball purely rolls on the raceway. Different from the skidding phenomenon that occurs in low-load and high-speed bearing, over-skidding usually occurs in large-size angular contact bearings, and it is still difficult to suppress under high load conditions. The main forms of damage to the raceway by over-skidding are spinning and gyro slip. To further explore the vibration characteristics and thermal effects of this phenomenon, a set of over-skidding tests of an angular contact bearing with a bore diameter of 220 mm were conducted on an industrial-size test bench. Through the experiment, the influence of axial load, rotational speed, and lubrication conditions on the occurrence of over-skidding were determined. Based on a previous dynamics model, the heat generation and thermal network models were integrated in the present study to predict the over-skidding and its thermal behavior. The model was validated in terms of the measured degree of over-skidding and temperature rise. The results showed that the degree of over-skidding reaches up to 12% of the theoretical value, and the friction power loss of the ball-pocket accounts for 30% of the total power loss. The analysis of the vibration signal showed a strong correlation between the bearing vibration characteristics and over-skidding behavior, thereby providing a way to indirectly measure the degree of over-skidding.
Zitieren
APA
Gao, S., Han, Q., Pennacchi, P., Chatterton, S., & Chu, F. (2023). Dynamic, thermal, and vibrational analysis of ball bearings with over-skidding behavior. Friction, 11(4), 580-601. https://doi.org/10.1007/s40544-022-0622-9
Vancouver
Gao S, Han Q, Pennacchi P, Chatterton S, Chu F. Dynamic, thermal, and vibrational analysis of ball bearings with over-skidding behavior. Friction. 2023;11(4):580-601. doi:10.1007/s40544-022-0622-9
BibTeX
@article{Gao2023,
author = {Gao, Shuai and Han, Qinkai and Pennacchi, Paolo and Chatterton, Steven and Chu, Fulei},
title = {Dynamic, thermal, and vibrational analysis of ball bearings with over-skidding behavior},
journal = {Friction},
year = {2023},
volume = {11},
number = {4},
pages = {580--601},
doi = {10.1007/s40544-022-0622-9}
}
EUVIMED