EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring the photovoltaic potential of CsSbCl4 Dion Jacobson Perovskites through first-principle calculations and SCAPS simulations

Atta Ullah, Ibrar Ahmad, Adnan Sadiq, Muhammad Usman, Haris Haider, Muhammad Afzal, Khizar Hayat, Abdullah Shah, Zahir Shah, Narcisa Vrinceanu, Said Karim Shah

Materials for Renewable and Sustainable Energy · 2025-12 · 14 (3)

DOI: 10.1007/s40243-025-00336-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials for Renewable and Sustainable Energy, online erschienen am 26.11.2025. Verfasst von Atta Ullah und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitatea "Lucian Blaga" din Sibiu.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a comprehensive computational investigation of lead (Pb)-free CsSbCl 4 Dion–Jacobson (DJ)-based perovskite solar cells (PSCs), combining density functional theory (DFT) and Solar Cell Capacitance Simulator (SCAPS 1-D) device simulations. The electronic and optical properties of CsSbCl 4 were evaluated using two different exchange–correlation functionals, PBE-GGA and TB-mBJ. Notably, the band structure displays a direct bandgap of 1.395 eV with TB-mBJ, closely aligned with the Shockley–Queisser (SQ) limit, indicating the material’s suitability for high-performance photovoltaics. Projected density of states (PDOS) analysis revealed Sb s-states dominate the valence band (VB), and Sb 5p-states dominate the conduction band (CB), highlighting the central role of antimony in governing electronic transitions, while absorption spans the electromagnetic spectrum from UV to near IR, with a high absorption coefficient around 10 5 cm −1 , ensuring efficient light harvesting. To optimize the solar cell architecture, key parameters were systematically tuned using SCAPS 1-D, including the selection of electron transport layer (ETL) and hole transport layer (HTL), absorber layer (AL) thickness, doping concentration (N A ), and defect density (Nt) were varied to enhance device output. Further, the influence of external conditions like series resistance (Rs), shunt resistance (Rsh), operating temperatures (300–400 K), and solar irradiance on photovoltaic performance was rigorously investigated. After careful optimization, the simulated device achieved a high short-circuit current density (J SC ) of 30.34 mA/cm 2 , an open-circuit voltage (V OC ) of 1.04 V, a fill factor (FF) of 85.17%, and a power conversion efficiency (PCE) of 26.95%. Altogether, these findings not only underscore the potential of CsSbCl 4 perovskite as a promising non-toxic Pb-free alternative but also provide a viable route toward the realization of high-efficiency next-generation photovoltaics.

Förderung

  • Universitatea "Lucian Blaga" din Sibiu

Zitieren

APA

Ullah, A., Ahmad, I., Sadiq, A., Usman, M., Haider, H., Afzal, M., Hayat, K., Shah, A., Shah, Z., Vrinceanu, N., & Shah, S. K. (2025). Exploring the photovoltaic potential of CsSbCl4 Dion Jacobson Perovskites through first-principle calculations and SCAPS simulations. Materials for Renewable and Sustainable Energy, 14(3). https://doi.org/10.1007/s40243-025-00336-4

Vancouver

Ullah A, Ahmad I, Sadiq A, Usman M, Haider H, Afzal M, et al. Exploring the photovoltaic potential of CsSbCl4 Dion Jacobson Perovskites through first-principle calculations and SCAPS simulations. Materials for Renewable and Sustainable Energy. 2025;14(3). doi:10.1007/s40243-025-00336-4

BibTeX
@article{Ullah2025,
  author = {Ullah, Atta and Ahmad, Ibrar and Sadiq, Adnan and Usman, Muhammad and Haider, Haris and Afzal, Muhammad and Hayat, Khizar and Shah, Abdullah and Shah, Zahir and Vrinceanu, Narcisa and Shah, Said Karim},
  title = {Exploring the photovoltaic potential of CsSbCl4 Dion Jacobson Perovskites through first-principle calculations and SCAPS simulations},
  journal = {Materials for Renewable and Sustainable Energy},
  year = {2025},
  volume = {14},
  number = {3},
  doi = {10.1007/s40243-025-00336-4}
}
Kostenlos starten →