EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of semiconductor to metallic transitions of perovskite CsGeCl3 material through induced pressure: a DFT calculation for photovoltaic and optoelectronic applications

Waqar Azeem, Muhammad Khuram Shahzad, Shoukat Hussain, Fahad Azad, Muhammad Jehanzaib Aslam, Vineet Tirth, Hassan Alqahtani, Ali Algahtani, Tawfiq Al-Mughanam, Yew Hoong Wong

Materials for Renewable and Sustainable Energy · 2025-04 · 14 (1)

DOI: 10.1007/s40243-024-00276-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials for Renewable and Sustainable Energy, online erschienen am 20.11.2024. Verfasst von Waqar Azeem und 9 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

First-principle investigations explore materials science for functional purposes. The physical properties of CsGeCl 3 are investigated under pressure in steps of 1.0 GPa. The CASTEP and GGA-PBE technique is used to understand the characteristics of cubic-based CsGeCl 3 crystal structures with space group 221. The energy bandgap (BG) exhibited direct semiconductors to metallic transition nature at pressures and its value decreased from 1.06 to 0.0 eV. It is observed during computations that it maintains the cubic phase with lattice parameters decreasing from 5.33 to 5.02 Å. A thorough analysis of optical characteristics under pressure shows that the UV spectrum region corresponds to strong peaks in optical properties, with a slight shift in peaks towards greater energies. Additionally, it satisfies the Born stability for mechanical stability and has an anisotropic (A) nature due to the anisotropic factor (0.529 to 1.501) of unity. The ductile nature of CsGeCl 3 is indicated by the Poisson scale (0.260 to 0.289) limits and Pugh’s ratio (1.751 to 2.037). If Cauchy pressure (C p ) is low, the material shows non-metallic behavior, and at high pressures, it shows metallic behavior, with a range of 1.299 to 9.961 GPa. As a result, the analysis shows that said material is suitable for photovoltaic and optoelectronic activity.

Zitieren

APA

Azeem, W., Shahzad, M. K., Hussain, S., Azad, F., Aslam, M. J., Tirth, V., Alqahtani, H., Algahtani, A., Al-Mughanam, T., & Wong, Y. H. (2025). Investigation of semiconductor to metallic transitions of perovskite CsGeCl3 material through induced pressure: a DFT calculation for photovoltaic and optoelectronic applications. Materials for Renewable and Sustainable Energy, 14(1). https://doi.org/10.1007/s40243-024-00276-5

Vancouver

Azeem W, Shahzad MK, Hussain S, Azad F, Aslam MJ, Tirth V, et al. Investigation of semiconductor to metallic transitions of perovskite CsGeCl3 material through induced pressure: a DFT calculation for photovoltaic and optoelectronic applications. Materials for Renewable and Sustainable Energy. 2025;14(1). doi:10.1007/s40243-024-00276-5

BibTeX
@article{Azeem2025,
  author = {Azeem, Waqar and Shahzad, Muhammad Khuram and Hussain, Shoukat and Azad, Fahad and Aslam, Muhammad Jehanzaib and Tirth, Vineet and Alqahtani, Hassan and Algahtani, Ali and Al-Mughanam, Tawfiq and Wong, Yew Hoong},
  title = {Investigation of semiconductor to metallic transitions of perovskite CsGeCl3 material through induced pressure: a DFT calculation for photovoltaic and optoelectronic applications},
  journal = {Materials for Renewable and Sustainable Energy},
  year = {2025},
  volume = {14},
  number = {1},
  doi = {10.1007/s40243-024-00276-5}
}
Kostenlos starten →