EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultimate capacity of as-welded and post-weld treated ultra-high-strength steel fillet weld joints at room and arctic temperatures

Kalle Lipiäinen, Shahriar Afkhami, Antti Ahola, Tuomas Skriko

Welding in the World · 2026-12 · 70 (12) · 6177-6185

DOI: 10.1007/s40194-026-02525-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Welding in the World, online erschienen am 15.06.2026. Verfasst von Kalle Lipiäinen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Business Finland, LUT University (previously Lappeenranta University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Post-weld treatments (PWTs) are well known to improve the fatigue strength of weldments by reducing stress concentrations and introducing beneficial compressive residual stresses at the weld toes. In addition, alterations in material microstructure and surface quality caused by PWTs can affect fatigue properties in some cases. TIG dressing and HFMI treatment increased significantly fatigue strength whereas laser dressing featured only minor effects in present study. However, less attention has been given to investigating the effect of PWTs on the static strength of welded joints, especially at low temperatures and in structural steels, which are sensitive to heat-related workshop processes. In this study, experimental static tensile tests were performed at room (+ 20 °C) and arctic (− 40 °C) temperatures on as-welded, burr-ground, HFMI-treated, TIG-dressed, and laser-dressed non-load-carrying filled weld joints made of direct-quenched ultra-high-strength steel (UHSS). The results of the tensile tests and their accompanying digital image correlation measurements show that PWTs can have a noticeable effect on the load-carrying and deformation capacity of UHSS fillet weld joints, as well as at failure locations in weldments, depending on the alterations in joint geometry and microstructure caused by the applied PWT method. Furthermore, the behavior of as-welded and post-weld-treated UHSS fillet weld joints was similar at room and low ambient temperatures under quasi-static loading.

Förderung

  • Business Finland
  • LUT University (previously Lappeenranta University of Technology

Zitieren

APA

Lipiäinen, K., Afkhami, S., Ahola, A., & Skriko, T. (2026). Ultimate capacity of as-welded and post-weld treated ultra-high-strength steel fillet weld joints at room and arctic temperatures. Welding in the World, 70(12), 6177-6185. https://doi.org/10.1007/s40194-026-02525-9

Vancouver

Lipiäinen K, Afkhami S, Ahola A, Skriko T. Ultimate capacity of as-welded and post-weld treated ultra-high-strength steel fillet weld joints at room and arctic temperatures. Welding in the World. 2026;70(12):6177-6185. doi:10.1007/s40194-026-02525-9

BibTeX
@article{Lipiinen2026,
  author = {Lipiäinen, Kalle and Afkhami, Shahriar and Ahola, Antti and Skriko, Tuomas},
  title = {Ultimate capacity of as-welded and post-weld treated ultra-high-strength steel fillet weld joints at room and arctic temperatures},
  journal = {Welding in the World},
  year = {2026},
  volume = {70},
  number = {12},
  pages = {6177--6185},
  doi = {10.1007/s40194-026-02525-9}
}
Kostenlos starten →