EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A comprehensive study on the optimization of laser welding process parameters for electric vehicle battery interconnections

Aygen Ahsen Yıldırım, Erol Feyzullahoğlu, Rıdvan Yamanoğlu

Welding in the World · 21.05.2026

DOI: 10.1007/s40194-026-02490-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Welding in the World, online erschienen am 21.05.2026. Verfasst von Aygen Ahsen Yıldırım und 2 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Kocaeli.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explored the application of laser welding for joining aluminum and Hilumin® for a cell-to-tab joints in Li-ion battery packs examining influence of laser-related parameters such as welding speed, laser power, and oscillation amplitude on the properties of welds and optimized the parameters by using Taguchi method. Initially, aluminum and Hilumin® sheet materials were joined with laser welding. Electrical resistances of the welded samples were measured. Then, lap shear strengths were determined using the tensile device. As a result of the optimizations, it was determined which laser welding parameters would result in the minimal electrical resistance and maximal joint strength. In this study, the preferred minimum electrical resistance and maximum joint strength values for battery interconnection joints, with varying laser power, welding speed, and oscillation amplitude parameters, were achieved with a combination of 890 W power, 1 mm oscillation amplitude, and 8.5 m/min speed. If optimum parameters are used in establishing the connection, the maximum weld seam strength achieved was 32.36 MPa, and the minimum electrical contact resistance was 0.4186 mΩ. Findings show that welding speed strongly influenced the microstructure and mechanical and electrical properties of the welds, with higher speeds enhancing lap shear strength and reducing electrical contact resistance by favoring ductile Fe-rich intermetallic formation, while lower speeds led to brittle Al-rich intermetallics. Increasing the welding speed also increased the strength of connection.

Förderung

  • University of Kocaeli

Zitieren

APA

Yıldırım, A. A., Feyzullahoğlu, E., & Yamanoğlu, R. (2026). A comprehensive study on the optimization of laser welding process parameters for electric vehicle battery interconnections. Welding in the World. https://doi.org/10.1007/s40194-026-02490-3

Vancouver

Yıldırım AA, Feyzullahoğlu E, Yamanoğlu R. A comprehensive study on the optimization of laser welding process parameters for electric vehicle battery interconnections. Welding in the World. 2026. doi:10.1007/s40194-026-02490-3

BibTeX
@article{Yldrm2026,
  author = {Yıldırım, Aygen Ahsen and Feyzullahoğlu, Erol and Yamanoğlu, Rıdvan},
  title = {A comprehensive study on the optimization of laser welding process parameters for electric vehicle battery interconnections},
  journal = {Welding in the World},
  year = {2026},
  doi = {10.1007/s40194-026-02490-3}
}
Kostenlos starten →