Application of weldment design guidelines to fatigue life prediction of steel-welded tubular joints, part II: multi-channel constant and variable amplitude loading
Welding in the World · 2026-12 · 70 (12) · 6051-6065
DOI: 10.1007/s40194-026-02475-2 ↗Kurz gefasst
Leitlinie in der Zeitschrift Welding in the World, online erschienen am 02.05.2026. Verfasst von Ahmad Razi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Application of weldment design guidelines to fatigue life estimation of welded joints in the literature has been mostly focused on single-channel loading conditions, while more effort should be made to address realistic loading scenarios such as multi-channel loading cases. part I of this two-part publication reviewed BS-7608, IIW, and EC3 design guidelines and applied them to fatigue life prediction of steel-welded tubular joints with partial weld penetration under CA and VA single-channel axial and torsional loadings. In this part II, the guidelines’ recommendations are applied to multi-channel fatigue life prediction of steel-welded joints. For out-of-phase CA multi-channel loading, the IIW guideline resulted in life estimations within a factor of 3 on the safe side, as compared to a factor of 5 with high conservative tendencies based on BS-7608 and EC3 guidelines. Three methods are outlined for analysis of multi-channel VA loading cases based on the modified Palmgren–Miner method, equivalent stress signal, and interaction equations. Based on the results, the modified interaction equation method achieved the highest accuracy (within a factor of 3) among the three methods for multi-channel VA loading conditions. The equivalent stress reformulations of the interaction equations showed good applicability to multi-channel CA and VA life estimations. In general, predictions by the IIW guideline were more accurate with better proportional and nonproportional data consolidation compared to EC3 and BS-7608.
Zitieren
APA
Razi, A., Fatemi, A., & Farajian, M. (2026). Application of weldment design guidelines to fatigue life prediction of steel-welded tubular joints, part II: multi-channel constant and variable amplitude loading. Welding in the World, 70(12), 6051-6065. https://doi.org/10.1007/s40194-026-02475-2
Vancouver
Razi A, Fatemi A, Farajian M. Application of weldment design guidelines to fatigue life prediction of steel-welded tubular joints, part II: multi-channel constant and variable amplitude loading. Welding in the World. 2026;70(12):6051-6065. doi:10.1007/s40194-026-02475-2
BibTeX
@article{Razi2026,
author = {Razi, Ahmad and Fatemi, Ali and Farajian, Majid},
title = {Application of weldment design guidelines to fatigue life prediction of steel-welded tubular joints, part II: multi-channel constant and variable amplitude loading},
journal = {Welding in the World},
year = {2026},
volume = {70},
number = {12},
pages = {6051--6065},
doi = {10.1007/s40194-026-02475-2}
}
EUVIMED