Fatigue crack propagation and repair using crack-arrest holes in trough girder railway bridges
Welding in the World · 2026-12 · 70 (12) · 5979-5993
DOI: 10.1007/s40194-026-02444-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Welding in the World, online erschienen am 28.04.2026. Verfasst von Miki Shibata und 5 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science, Japan Science and Technology Agency, Nagoya University.
Abstract (Originalsprache)
Fatigue cracks have been observed in the welded joints of end diaphragms in steel trough girder railway bridges. These fatigue cracks are thought to result from deterioration of the bridge supports and uneven settlements induced by train loads passing over them. As a simple repair method, crack-arrest holes are often drilled at the crack tips. However, their effectiveness remains unclear, and in some cases, the cracks tend to re-initiate and propagate. In this study, a fatigue test was conducted on an end diaphragm from a trough girder bridge under support conditions simulating those of an actual bridge. Crack propagation behavior and the effectiveness of the crack-arrest hole repair were examined through fatigue test and numerical analysis. In addition, finite element analysis replicating real bridge conditions was performed to clarify the effects of various parameters on the local stress at the edge of the crack-arrest hole. Furthermore, the effect of inserting a bolt into the hole on reducing the local stress at the hole edge was also investigated.
Förderung
- Japan Society for the Promotion of Science
- Japan Science and Technology Agency
- Nagoya University
Zitieren
APA
Shibata, M., Hanji, T., Tateishi, K., Shimizu, M., Yamaguchi, M., & Niwa, Y. (2026). Fatigue crack propagation and repair using crack-arrest holes in trough girder railway bridges. Welding in the World, 70(12), 5979-5993. https://doi.org/10.1007/s40194-026-02444-9
Vancouver
Shibata M, Hanji T, Tateishi K, Shimizu M, Yamaguchi M, Niwa Y. Fatigue crack propagation and repair using crack-arrest holes in trough girder railway bridges. Welding in the World. 2026;70(12):5979-5993. doi:10.1007/s40194-026-02444-9
BibTeX
@article{Shibata2026,
author = {Shibata, Miki and Hanji, Takeshi and Tateishi, Kazuo and Shimizu, Masaru and Yamaguchi, Makoto and Niwa, Yuichiro},
title = {Fatigue crack propagation and repair using crack-arrest holes in trough girder railway bridges},
journal = {Welding in the World},
year = {2026},
volume = {70},
number = {12},
pages = {5979--5993},
doi = {10.1007/s40194-026-02444-9}
}
EUVIMED