EUVIMEDEUVIMED entdecken
Crossref

Effect of nickel interlayer thickness on intermetallic compound formation and interfacial integrity in pulsed laser welding of aluminum and copper

Rajdev Singh, Navneet Arora, Amit Choudhary

Welding in the World · 2026-10 · 70 (10) · 5171-5192

DOI: 10.1007/s40194-026-02375-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Welding in the World, online erschienen am 12.02.2026. Verfasst von Rajdev Singh und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 52 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser welding of aluminum (Al) and copper (Cu) is widely used in battery manufacturing due to its low heat input and precise control. However, the significant thermal, mechanical, and metallurgical differences between Al and Cu often promote the formation of brittle intermetallic compounds (IMCs), leading to microcracks, voids, and reduced joint integrity. To address this, nickel (Ni) was introduced as an interlayer by electroplating on Al sheets. This study investigates the effect of varying Ni plating thicknesses (0.8–3.5 µm) and configurations (top-side, bottom-side, and both sides) on IMC formation and overall joint quality in Al-Cu joints produced using a nanosecond pulsed laser. Key parameters, including weld morphology, thermal behavior, shear strength, electrical resistance, and IMC characteristics, were examined. Microstructural analysis revealed that Ni effectively suppresses excessive IMC growth and minimizes defects. Both-side plating with a 1.5 µm Ni layer yielded the thinnest IMC layer (0.24 µm versus 1.86 µm in non-plated joints), correlating with an 11.1% increase in shear strength, 23.7% improvement in elongation, and 14.6% reduction in electrical resistance. These findings highlight the critical role of Ni interlayers in controlling IMC evolution and improving the microstructural integrity of Al-Cu laser welds.

Zitieren

APA

Singh, R., Arora, N., & Choudhary, A. (2026). Effect of nickel interlayer thickness on intermetallic compound formation and interfacial integrity in pulsed laser welding of aluminum and copper. Welding in the World, 70(10), 5171-5192. https://doi.org/10.1007/s40194-026-02375-5

Vancouver

Singh R, Arora N, Choudhary A. Effect of nickel interlayer thickness on intermetallic compound formation and interfacial integrity in pulsed laser welding of aluminum and copper. Welding in the World. 2026;70(10):5171-5192. doi:10.1007/s40194-026-02375-5

BibTeX
@article{Singh2026,
  author = {Singh, Rajdev and Arora, Navneet and Choudhary, Amit},
  title = {Effect of nickel interlayer thickness on intermetallic compound formation and interfacial integrity in pulsed laser welding of aluminum and copper},
  journal = {Welding in the World},
  year = {2026},
  volume = {70},
  number = {10},
  pages = {5171--5192},
  doi = {10.1007/s40194-026-02375-5}
}
Kostenlos starten →