EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Acoustic process monitoring during projection welding using airborne sound analysis and machine learning

J. Koal, M. Baumgarten, C. Nikolov, S. Ramakrishnan, C. Mathiszik, H. C. Schmale

Welding in the World · 2025-02 · 69 (2) · 459-470

DOI: 10.1007/s40194-024-01876-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Welding in the World, online erschienen am 20.11.2024. Verfasst von J. Koal und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Klimaschutz, Technische Universität Dresden.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Resistance projection welding is predominantly performed using capacitor discharge machines, known for their short welding times, rapid current rise times, and high currents compared to medium-frequency inverter technology. The resulting joints are covered up during resistance welding, so that either destructive or non-destructive testing is required to evaluate the quality. Process monitoring is therefore essential in resistance projection welding. The requirement for this is process data that can be acquired and integrated into the process monitoring easily, cost-effectively, and contactlessly. This study investigates the use of low-cost condenser microphones to utilize the airborne sound generated during welding for process monitoring. It is shown that, acoustic data processed by the fast Fourier transform can be used to evaluate the quality of the connection. Only a minor influence of the microphone position could be determined. A machine learning model was also used to detect the batch of the welding nut. The machine parameters, welding nut geometry and material were kept constant. The results show a batch prediction of more than 90% using airborne sound.

Förderung

  • Bundesministerium für Wirtschaft und Klimaschutz
  • Technische Universität Dresden

Zitieren

APA

Koal, J., Baumgarten, M., Nikolov, C., Ramakrishnan, S., Mathiszik, C., & Schmale, H. C. (2025). Acoustic process monitoring during projection welding using airborne sound analysis and machine learning. Welding in the World, 69(2), 459-470. https://doi.org/10.1007/s40194-024-01876-5

Vancouver

Koal J, Baumgarten M, Nikolov C, Ramakrishnan S, Mathiszik C, Schmale HC. Acoustic process monitoring during projection welding using airborne sound analysis and machine learning. Welding in the World. 2025;69(2):459-470. doi:10.1007/s40194-024-01876-5

BibTeX
@article{Koal2025,
  author = {Koal, J. and Baumgarten, M. and Nikolov, C. and Ramakrishnan, S. and Mathiszik, C. and Schmale, H. C.},
  title = {Acoustic process monitoring during projection welding using airborne sound analysis and machine learning},
  journal = {Welding in the World},
  year = {2025},
  volume = {69},
  number = {2},
  pages = {459--470},
  doi = {10.1007/s40194-024-01876-5}
}
Kostenlos starten →