Feasibility Assessment of 3D Printing-Based Tubular Tissue Flap in a Porcine Model for Long Segmental Tracheal Reconstruction
Tissue Engineering and Regenerative Medicine · 2025-06 · 22 (4) · 469-479
DOI: 10.1007/s13770-025-00718-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tissue Engineering and Regenerative Medicine, online erschienen am 21.05.2025. Verfasst von Jeong Hun Park und 7 weiteren Autor:innen. Beteiligte Einrichtung: Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, 313 Ferst Drive, Atlanta, GA, 30332, U…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Trachea, Plastic Surgery Procedures, Tissue Engineering. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute of Child Health and Human Development, Regenerative Engineering and Medicine Center.
Abstract (Originalsprache)
BACKGROUND Despite advances in tissue engineering, current clinical reconstructive options for long segment tracheal defects are limited. In this study, a 3D printing based tubular tissue flap strategy was developed for long segment tracheal reconstruction. METHOD A stent-patterned airway scaffold with sufficient radial rigidity and longitudinal bending flexibility was designed and its mechanical behavior was analyzed using finite element analysis (FEA). The stent-patterned airway scaffolds with a removable central core to preserve an internal lumen were created by selective laser sintering (SLS) based 3D printing. The stent-patterned airway scaffold with the central core, filled with poly (ethylene glycol) diacrylate-dithiothreitol (PEGDA-DTT) hydrogel containing erythropoietin (EPO) to enhance vascularization, was then implanted into the latissimus dorsi muscle of a Yucatan minipig. RESULTS A tubular tissue flap, with controlled luminal layer thickness was successfully created by removing the central core from the retrieved tissue flap containing the airway scaffold after 45 days of implantation in the Yucatan minipig model. CONCLUSION The current work validated the potential of the tubular tissue flap based on the 3D printing as a clinically viable tissue engineering strategy for long segment tracheal reconstruction.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, 313 Ferst Drive, Atlanta, GA, 30332, USA.
- Center for 3D Medical Fabrication, Georgia Institute of Technology, 313 Ferst Drive, Atlanta, GA, 30332, USA.
- Global Center for Medical Innovation, 575 14th Street, Atlanta, GA, 30318, USA.
- Petit Institute for Bioengineering and Bioscience, Georgia Institute of Technology, 315 Ferst Drive, Atlanta, GA, 30332, USA.
- Department of Otolaryngology Head and Neck Surgery, Emory University School of Medicine, 550 Peachtree Street NE, Atlanta, GA, 30308, USA.
- Department of Molecular Science and Technology, Ajou University, 206 Worldcup-Ro, Suwon, 16499, Republic of Korea.
Förderung
- National Institute of Child Health and Human Development
- Regenerative Engineering and Medicine Center
Zitieren
APA
Park, J. H., Brown, N. E., Tucker, S. J., Temenoff, J. S., El-Deiry, M., Park, H. J., Tkaczuk, A. T., & Hollister, S. J. (2025). Feasibility Assessment of 3D Printing-Based Tubular Tissue Flap in a Porcine Model for Long Segmental Tracheal Reconstruction. Tissue Engineering and Regenerative Medicine, 22(4), 469-479. https://doi.org/10.1007/s13770-025-00718-9
Vancouver
Park JH, Brown NE, Tucker SJ, Temenoff JS, El-Deiry M, Park HJ, et al. Feasibility Assessment of 3D Printing-Based Tubular Tissue Flap in a Porcine Model for Long Segmental Tracheal Reconstruction. Tissue Engineering and Regenerative Medicine. 2025;22(4):469-479. doi:10.1007/s13770-025-00718-9
BibTeX
@article{Park2025,
author = {Park, Jeong Hun and Brown, Nettie E and Tucker, Sarah Jo and Temenoff, Johnna S and El-Deiry, Mark and Park, Hyun-Ji and Tkaczuk, Andrew T and Hollister, Scott J},
title = {Feasibility Assessment of 3D Printing-Based Tubular Tissue Flap in a Porcine Model for Long Segmental Tracheal Reconstruction},
journal = {Tissue Engineering and Regenerative Medicine},
year = {2025},
volume = {22},
number = {4},
pages = {469--479},
doi = {10.1007/s13770-025-00718-9}
}
EUVIMED