Mechanics Predicts Effective Critical-Size Bone Regeneration Using 3D-Printed Bioceramic Scaffolds
Tissue Engineering and Regenerative Medicine · 2023
DOI: 10.1007/s13770-023-00577-2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tissue Engineering and Regenerative Medicine, 2023. Verfasst von Pablo Blázquez-Carmona und 5 weiteren Autor:innen. Beteiligte Einrichtung: Escuela Técnica Superior de Ingeniería, Universidad de Sevilla, Avenida Camino de los Descubrimientos s/n, 41092, Seville, Spain. pbcarmona@us.es. Hauptthemen laut MEDLINE: Tissue Scaffolds, Tissue Engineering. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Economía y Competitividad, Universidad de Sevilla.
Abstract (Originalsprache)
BACKGROUND: 3D-printed bioceramic scaffolds have gained popularity due to their controlled microarchitecture and their proven biocompatibility. However, their high brittleness makes their surgical implementation complex for weight-bearing bone treatments. Thus, they would require difficult-to-instrument rigid internal fixations that limit a rigorous evaluation of the regeneration progress through the analysis of mechanic-structural parameters. METHODS: We investigated the compatibility of flexible fixations with fragile ceramic implants, and if mechanical monitoring techniques are applicable to bone tissue engineering applications. Tissue engineering experiments were performed on 8 ovine metatarsi. A 15 mm bone segment was directly replaced with a hydroxyapatite scaffold and stabilized by an instrumented Ilizarov-type external fixator. Several in vivo monitoring techniques were employed to assess the mechanical and structural progress of the tissue. RESULTS: The applied surgical protocol succeeded in combining external fixators and subject-specific bioceramic scaffolds without causing fatal fractures of the implant due to stress concentrator. The bearing capacity of the treated limb was initially altered, quantifying a 28–56% reduction of the ground reaction force, which gradually normalized during the consolidation phase. A faster recovery was reported in the bearing capacity, stiffening and bone mineral density of the callus. It acquired a predominant mechanical role over the fixator in the distribution of internal forces after one post-surgical month. CONCLUSION: The bioceramic scaffold significantly accelerated in vivo the bone formation compared to other traditional alternatives in the literature (e.g., distraction osteogenesis). In addition, the implemented assessment techniques allowed an accurate quantitative evaluation of the bone regeneration through mechanical and imaging parameters.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Escuela Técnica Superior de Ingeniería, Universidad de Sevilla, Avenida Camino de los Descubrimientos s/n, 41092, Seville, Spain. pbcarmona@us.es.
- Instituto de Biomedicina de Sevilla (IBiS), Universidad de Sevilla, Seville, Spain. pbcarmona@us.es.
- Escuela Técnica Superior de Ingeniería, Universidad de Huelva, Huelva, Spain.
- Instituto de Biomedicina de Sevilla (IBiS), Universidad de Sevilla, Seville, Spain.
- Escuela Técnica Superior de Ingeniería, Universidad de Sevilla, Avenida Camino de los Descubrimientos s/n, 41092, Seville, Spain.
- Departamento Medicina y Cirugía Animal, Universidad de Córdoba, Campus Universitario de Rabanales, Córdoba, Spain.
Förderung
- Ministerio de Economía y Competitividad
- Universidad de Sevilla
Zitieren
APA
Blázquez-Carmona, P., Mora-Macías, J., Martínez-Vázquez, F. J., Morgaz, J., Domínguez, J., & Reina-Romo, E. (2023). Mechanics Predicts Effective Critical-Size Bone Regeneration Using 3D-Printed Bioceramic Scaffolds. Tissue Engineering and Regenerative Medicine. https://doi.org/10.1007/s13770-023-00577-2
Vancouver
Blázquez-Carmona P, Mora-Macías J, Martínez-Vázquez FJ, Morgaz J, Domínguez J, Reina-Romo E. Mechanics Predicts Effective Critical-Size Bone Regeneration Using 3D-Printed Bioceramic Scaffolds. Tissue Engineering and Regenerative Medicine. 2023. doi:10.1007/s13770-023-00577-2
BibTeX
@article{BlzquezCarmona2023,
author = {Blázquez-Carmona, Pablo and Mora-Macías, Juan and Martínez-Vázquez, Francisco J and Morgaz, Juan and Domínguez, Jaime and Reina-Romo, Esther},
title = {Mechanics Predicts Effective Critical-Size Bone Regeneration Using 3D-Printed Bioceramic Scaffolds},
journal = {Tissue Engineering and Regenerative Medicine},
year = {2023},
doi = {10.1007/s13770-023-00577-2}
}
EUVIMED