Removal of lead ions (Pb2+) from aqueous solution using chitosan/starch composite material: Experimental and density functional theory findings
Biomass Conversion and Biorefinery · 2025-01 · 15 (1) · 1041-1056
DOI: 10.1007/s13399-024-05287-w ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomass Conversion and Biorefinery, online erschienen am 07.02.2024. Verfasst von Muhammed Safa Çelik und 6 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sivas Cumhuriyet University.
Abstract (Originalsprache)
Treatment of wastewater has become vital to prevent environmental pollution in recent years. Adsorption is an easily applicable, low-cost and efficient method and is the subject of this study. In this study, an adsorbent was synthesized to be used in heavy metal removal using chitosan and starch. The composite was characterized by Fourier transform infrared (FTIR) spectrophotometry, X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis. It was determined that the composite had an amorphous and compact structure. Adsorption experiments were carried out under the optimized parameters such as solution pH, concentration, adsorbent amount, equilibrium time, and temperature. It shows that during adsorption, with the increase in pH, the adsorption efficiency and adsorption capacity first increase and then a fluctuation occurs. The highest adsorption efficiency and Q value were reached at pH 3.46 as 78% and 0.038 mol/kg, respectively. Moreover, the adsorption capacity (Q) reached its highest value with a value of 0.067 mol/kg in the presence of 30 mg adsorbent. Equilibrium experiments were validated by the Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. To investigate the adsorption mechanism, pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models were used. It was determined that the adsorption process followed the D-R isotherm (R 2 = 0.99) and PSO (R 2 = 0.99). Therefore, the existence of chemical adsorption can be mentioned. Thermodynamic parameters enthalpy (∆H), Gibbs free energy (∆G) and entropy change (∆S) were investigated. The adsorbate-adsorbent interactions were studied by density functional theory (DFT).
Förderung
- Sivas Cumhuriyet University
Zitieren
APA
Çelik, M. S., Çaylak, O., Kütük, N., Yenidünya, A. F., Çetinkaya, S., Maslov, M. M., & Kaya, S. (2025). Removal of lead ions (Pb2+) from aqueous solution using chitosan/starch composite material: Experimental and density functional theory findings. Biomass Conversion and Biorefinery, 15(1), 1041-1056. https://doi.org/10.1007/s13399-024-05287-w
Vancouver
Çelik MS, Çaylak O, Kütük N, Yenidünya AF, Çetinkaya S, Maslov MM, et al. Removal of lead ions (Pb2+) from aqueous solution using chitosan/starch composite material: Experimental and density functional theory findings. Biomass Conversion and Biorefinery. 2025;15(1):1041-1056. doi:10.1007/s13399-024-05287-w
BibTeX
@article{elik2025,
author = {Çelik, Muhammed Safa and Çaylak, Osman and Kütük, Nurşah and Yenidünya, Ali Fazıl and Çetinkaya, Serap and Maslov, Mikhail M. and Kaya, Savaş},
title = {Removal of lead ions (Pb2+) from aqueous solution using chitosan/starch composite material: Experimental and density functional theory findings},
journal = {Biomass Conversion and Biorefinery},
year = {2025},
volume = {15},
number = {1},
pages = {1041--1056},
doi = {10.1007/s13399-024-05287-w}
}
EUVIMED