EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-printing of dipyridamole/thermoplastic polyurethane materials for bone regeneration

Masoud Adhami, Anushree Ghosh Dastidar, Qonita Kurnia Anjani, Usanee Detamornrat, Quim Tarrés, Marc Delgado-Aguilar, Jonathan G Acheson, Krishnagoud Manda, Susan A Clarke, Natalia Moreno-Castellanos, Eneko Larrañeta iD, Juan Domínguez-Robles

Drug Delivery and Translational Research · 2025

DOI: 10.1007/s13346-024-01744-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Drug Delivery and Translational Research, 2025. Verfasst von Masoud Adhami und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Pharmacy, Queen's University Belfast, Lisburn Road 97, Belfast, BT9 7BL, United Kingdom. Hauptthemen laut MEDLINE: Dipyridamole, Polyurethanes, Printing, Three-Dimensional, Bone Regeneration. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Ministerio de Ciencia e Innovación, Universidad de Sevilla.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tissue engineering combines biology and engineering to develop constructs for repairing or replacing damaged tissues. Over the last few years, this field has seen significant advancements, particularly in bone tissue engineering. 3D printing has revolutionised this field, allowing the fabrication of patient- or defect-specific scaffolds to enhance bone regeneration, thus providing a personalised approach that offers unique control over the shape, size, and structure of 3D-printed constructs. Accordingly, thermoplastic polyurethane (TPU)-based 3D-printed scaffolds loaded with dipyridamole (DIP) were manufactured to evaluate their in vitro osteogenic capacity. The fabricated DIP-loaded TPU-based scaffolds were fully characterised, and their physical and mechanical properties analysed. Moreover, the DIP release profile, the biocompatibility of scaffolds with murine calvaria-derived pre-osteoblastic cells, and the intracellular alkaline phosphatase (ALP) assay to verify osteogenic ability were evaluated. The results suggested that these materials offered an attractive option for preparing bone scaffolds due to their mechanical properties. Indeed, the addition of DIP in concentrations up to 10% did not influence the compression modulus. Moreover, DIP-loaded scaffolds containing the highest DIP cargo (10% w/w) were able to provide sustained drug release for up to 30 days. Furthermore, cell viability, proliferation, and osteogenesis of MC3T3-E1 cells were significantly increased with the highest DIP cargo (10% w/w) compared to the control samples. These promising results suggest that DIP-loaded TPU-based scaffolds may enhance bone regeneration. Combined with the flexibility of 3D printing, this approach has the potential to enable the creation of customized scaffolds tailored to patients’ needs at the point of care in the future. Graphical Abstract

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

DipyridamolePolyurethanesPrinting, Three-DimensionalBone RegenerationTissue ScaffoldsAnimalsMiceOsteogenesisTissue EngineeringCell LineOsteoblastsDrug Liberation

Stichwörter der Autor:innen

3D printingBone regenerationDipyridamoleFlexible materialsFused deposition modellingThermoplastic polyurethane

Substanzen

DipyridamolePolyurethanes

Autor:innen und Institutionen

  • School of Pharmacy, Queen's University Belfast, Lisburn Road 97, Belfast, BT9 7BL, United Kingdom.
  • School of Mechanical and Aerospace Engineering, Queen's University Belfast, Belfast, United Kingdom.
  • Group LEPAMAP-PRODIS, Department of Chemical Engineering, University of Girona, c/M. Aurèlia Campmany 61, Girona, 17003, Spain.
  • Nanotechnology and Integrated Bioengineering Centre (NIBEC), School of Engineering, Ulster University, Belfast, United Kingdom.
  • School of Nursing and Midwifery, Queen's University Belfast, Belfast, BT9 7BL, UK.
  • Department of Basic Sciences, Medicine School, Health Faculty, CICTA, Universidad Industrial de Santander, Cra 27 calle 9, Bucaramanga, 680002, Colombia.

ORCID-Profile: Eneko Larrañeta

Förderung

  • Engineering and Physical Sciences Research Council
  • Ministerio de Ciencia e Innovación
  • Universidad de Sevilla

Zitieren

APA

Adhami, M., Dastidar, A. G., Anjani, Q. K., Detamornrat, U., Tarrés, Q., Delgado-Aguilar, M., Acheson, J. G., Manda, K., Clarke, S. A., Moreno-Castellanos, N., Larrañeta, E., & Domínguez-Robles, J. (2025). 3D-printing of dipyridamole/thermoplastic polyurethane materials for bone regeneration. Drug Delivery and Translational Research. https://doi.org/10.1007/s13346-024-01744-1

Vancouver

Adhami M, Dastidar AG, Anjani QK, Detamornrat U, Tarrés Q, Delgado-Aguilar M, et al. 3D-printing of dipyridamole/thermoplastic polyurethane materials for bone regeneration. Drug Delivery and Translational Research. 2025. doi:10.1007/s13346-024-01744-1

BibTeX
@article{Adhami2025,
  author = {Adhami, Masoud and Dastidar, Anushree Ghosh and Anjani, Qonita Kurnia and Detamornrat, Usanee and Tarrés, Quim and Delgado-Aguilar, Marc and Acheson, Jonathan G and Manda, Krishnagoud and Clarke, Susan A and Moreno-Castellanos, Natalia and Larrañeta, Eneko and Domínguez-Robles, Juan},
  title = {3D-printing of dipyridamole/thermoplastic polyurethane materials for bone regeneration},
  journal = {Drug Delivery and Translational Research},
  year = {2025},
  doi = {10.1007/s13346-024-01744-1}
}
Kostenlos starten →