EUVIMEDEUVIMED entdecken
Crossref

Development and optimization of hydrogel-forming microneedles fabricated with 3d-printed molds for enhanced dermal diclofenac sodium delivery: a comprehensive in vitro, ex vivo, and in vivo study

Emre Tunçel iD, Serdar Tort iD, Sevtap Han iD, Çiğdem Yücel iD, Figen Tırnaksız iD

Drug Delivery and Translational Research · 2025-06 · 15 (6) · 2116-2145

DOI: 10.1007/s13346-024-01728-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Drug Delivery and Translational Research, online erschienen am 25.10.2024. Verfasst von Emre Tunçel und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Pharmaceutical Technology, Faculty of Pharmacy, Gazi University, Ankara, Türkiye. Hauptthemen laut MEDLINE: Diclofenac, Printing, Three-Dimensional, Hydrogels, Needles. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 131 Literaturangaben. Gefördert von: Gazi Üniversitesi.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the developing manufacturing technologies, the use of 3D printers in microneedle production is becoming widespread. Hydrogel-forming microneedles (HFMs), a variant of microneedles, demonstrate distinctive features such as a high loading capacity and controlled drug release. In this study, the conical microneedle master molds with approximately 500 μm needle height and 250 μm base diameter were created using a Stereolithography (SLA) 3D printer and were utilized to fabricate composite HFMs containing diclofenac sodium. Using Box-Behnken Design, the effects of different polymers on swelling index and mechanical strength of the developed HFMs were evaluated. The optimum HFMs were selected according to experimental design results with the aim of the highest mechanical strength with varying swelling indexes, which was needed to use 20% Gantrez S97 and 0.1% (F22), 0.42% (F23), and 1% (F24) hyaluronic acid. The skin penetration and drug release properties of the optimum formulations were assessed. Ex vivo studies were conducted on formulations to determine drug penetration and accumulation. F24, which has the highest mechanical strength and optimized swelling index, achieved the highest drug accumulation in the skin tissue (17.70 ± 3.66%). All optimum HFMs were found to be non-cytotoxic by the MTT cell viability test (> 70% cell viability). In in vivo studies, the efficacy of the F24 was assessed for the treatment of xylene-induced ear edema by contrasting it to the conventional dosage form. It was revealed that HFMs might be an improved replacement for conventional dosage forms in terms of dermal diseases such as actinic keratosis.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

DiclofenacPrinting, Three-DimensionalHydrogelsNeedlesAnti-Inflammatory Agents, Non-SteroidalDrug Delivery SystemsAnimalsAdministration, CutaneousDrug LiberationSkinSkin AbsorptionMale

Stichwörter der Autor:innen

Box-behnken designDermal drug deliveryDiclofenac sodiumHydrogel-forming microneedlesSLA 3D printingXylene-induced ear edema

Substanzen

DiclofenacHydrogelsAnti-Inflammatory Agents, Non-Steroidal

Autor:innen und Institutionen

  • Department of Pharmaceutical Technology, Faculty of Pharmacy, Gazi University, Ankara, Türkiye.
  • Department of Pharmacology, Faculty of Pharmacy, Gazi University, Ankara, Türkiye.
  • Department of Pharmaceutical Technology, Faculty of Pharmacy, Erciyes University, Kayseri, Türkiye.
  • Department of Pharmaceutical Technology, Faculty of Pharmacy, Gazi University, Ankara, Türkiye. tfigen@gazi.edu.tr.

ORCID-Profile: Emre Tunçel, Serdar Tort, Sevtap Han, Çiğdem Yücel, Figen Tırnaksız

Förderung

  • Gazi Üniversitesi

Zitieren

APA

Tunçel, E., Tort, S., Han, S., Yücel, Ç., & Tırnaksız, F. (2025). Development and optimization of hydrogel-forming microneedles fabricated with 3d-printed molds for enhanced dermal diclofenac sodium delivery: a comprehensive in vitro, ex vivo, and in vivo study. Drug Delivery and Translational Research, 15(6), 2116-2145. https://doi.org/10.1007/s13346-024-01728-1

Vancouver

Tunçel E, Tort S, Han S, Yücel Ç, Tırnaksız F. Development and optimization of hydrogel-forming microneedles fabricated with 3d-printed molds for enhanced dermal diclofenac sodium delivery: a comprehensive in vitro, ex vivo, and in vivo study. Drug Delivery and Translational Research. 2025;15(6):2116-2145. doi:10.1007/s13346-024-01728-1

BibTeX
@article{Tunel2025,
  author = {Tunçel, Emre and Tort, Serdar and Han, Sevtap and Yücel, Çiğdem and Tırnaksız, Figen},
  title = {Development and optimization of hydrogel-forming microneedles fabricated with 3d-printed molds for enhanced dermal diclofenac sodium delivery: a comprehensive in vitro, ex vivo, and in vivo study},
  journal = {Drug Delivery and Translational Research},
  year = {2025},
  volume = {15},
  number = {6},
  pages = {2116--2145},
  doi = {10.1007/s13346-024-01728-1}
}
Kostenlos starten →