Preparation of Medium–Low Strength Hemihydrate Gypsum from Phosphogypsum and Grey Correlation Evaluation of Autoclaving Energy Consumption
Waste and Biomass Valorization · 2025-04 · 16 (4) · 1729-1744
DOI: 10.1007/s12649-024-02754-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Waste and Biomass Valorization, online erschienen am 14.10.2024. Verfasst von Dongmei Liu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: The Hubei Three Gorges Laboratory Opening/Innovation Fund project, The 111 Project of China, The 111 Project of Hubei Province.
Abstract (Originalsprache)
This study explored the production of a medium–low strength α-hemihydrate gypsum (α-HH) from phosphogypsum using an autoclaved method. The influence of slurry concentration, spreading thickness, crystallizing agents, slurry pH, autoclaving temperature, and autoclaving time on the properties of α-HH was investigated. The energy consumption of various autoclaving processes was assessed using grey correlation theory. The research findings revealed that a 50% slurry concentration, 40 mm slurry spreading thickness, and 0.15% succinic acid as the crystallizing agent, with a slurry pH of 6, can yield α-HH crystals with an average aspect ratio of 1.42 and a high hemihydrate gypsum content of 80.06%. Increasing the autoclaving temperature and extending the autoclaving time resulted in a higher strength of α-HH. Autoclaving the slurry at 105 °C for 2.5 h yielded α-HH with a compressive strength of only 12.1 MPa. In contrast, autoclaving at 120 °C for 4 h produced α-HH with a higher compressive strength of 37.1 MPa. Grey correlation analysis revealed that the strength and energy consumption indices of the α-HH preparation had the highest correlation with the ideal sequence when autoclaved at 105 °C for 4 h, resulting in a compressive strength of 20.5 MPa.
Förderung
- The Hubei Three Gorges Laboratory Opening/Innovation Fund project
- The 111 Project of China
- The 111 Project of Hubei Province
Zitieren
APA
Liu, D., Yan, M., Nan, C., Xu, G., Zhou, W., Peng, Y., Wang, B., & Li, D. (2025). Preparation of Medium–Low Strength Hemihydrate Gypsum from Phosphogypsum and Grey Correlation Evaluation of Autoclaving Energy Consumption. Waste and Biomass Valorization, 16(4), 1729-1744. https://doi.org/10.1007/s12649-024-02754-3
Vancouver
Liu D, Yan M, Nan C, Xu G, Zhou W, Peng Y, et al. Preparation of Medium–Low Strength Hemihydrate Gypsum from Phosphogypsum and Grey Correlation Evaluation of Autoclaving Energy Consumption. Waste and Biomass Valorization. 2025;16(4):1729-1744. doi:10.1007/s12649-024-02754-3
BibTeX
@article{Liu2025,
author = {Liu, Dongmei and Yan, Mengyu and Nan, Cong and Xu, Gang and Zhou, Wanqing and Peng, Yanzhou and Wang, Bin and Li, Dongsheng},
title = {Preparation of Medium–Low Strength Hemihydrate Gypsum from Phosphogypsum and Grey Correlation Evaluation of Autoclaving Energy Consumption},
journal = {Waste and Biomass Valorization},
year = {2025},
volume = {16},
number = {4},
pages = {1729--1744},
doi = {10.1007/s12649-024-02754-3}
}
EUVIMED