Optimizing ETL/CsPbBr 3 buried interface contact for enhanced efficiency and stability of inorganic perovskite solar cells
Rare Metals · 2025-05 · 44 (5) · 3069-3079
DOI: 10.1007/s12598-024-03108-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Rare Metals, online erschienen am 20.02.2025. Verfasst von Si‐Yu Zhang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Xidian University, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.
Abstract (Originalsprache)
CsPbBr 3 perovskite solar cells (PSCs) have attracted significant interest for their remarkable stability under high temperatures and humidity. However, challenges such as energy loss at the CsPbBr 3 /oxide buried interface and imperfect band alignment have impeded further efficiency enhancements. In this study, TiO 2 , SnO 2 , or ZnO was employed as electron transport layer (ETL) materials, respectively, in CsPbBr 3 ‐based PSCs to optimize the band alignment at the ETL/CsPbBr 3 interface and enhance the film quality of CsPbBr 3 materials. The research findings indicate that the power conversion efficiency (PCE) of PSCs is influenced by the choice of ETL material. Specifically, TiO 2 ‐based PSCs achieved a PCE of 10.37% efficiency, higher than SnO 2 ‐ or ZnO‐based PSCs. This disparity in PCE can be attributed to variations in open‐circuit voltage, which stem from different band alignments at the ETL/CsPbBr 3 interface. Notably, superior photovoltaic performance was consistently observed in TiO 2 ‐based PSCs due to the substantial conduction band offset (∆ E c ) at the TiO 2 /CsPbBr 3 interface and the high quality of the CsPbBr 3 film. This not only enhances electron extraction at the TiO 2 /CsPbBr 3 interface but also diminishes non‐radiative recombination at the interface, as confirmed by density functional theory (DFT) calculations and experiments. Furthermore, photodetectors (PDs) based on TiO 2 /CsPbBr 3 heterojunction exhibit high photoresponse and photodetectivity. In conclusion, this study underscores the critical importance of the buried interface contact in CsPbBr 3 and offers a direct approach for fabricating efficient and stable inorganic PSCs and PDs.
Förderung
- Xidian University
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- Specially Funded Project for Interdisciplinary Exploration
- Research and Development Program of Shaanxi Province
Zitieren
APA
Zhang, S., Guo, X., Xu, Y., Jiao, Y., Lin, Z., Zhang, J., Ouyang, J., Guo, L., Hao, Y., & Chang, J. (2025). Optimizing ETL/CsPbBr 3 buried interface contact for enhanced efficiency and stability of inorganic perovskite solar cells. Rare Metals, 44(5), 3069-3079. https://doi.org/10.1007/s12598-024-03108-7
Vancouver
Zhang S, Guo X, Xu Y, Jiao Y, Lin Z, Zhang J, et al. Optimizing ETL/CsPbBr 3 buried interface contact for enhanced efficiency and stability of inorganic perovskite solar cells. Rare Metals. 2025;44(5):3069-3079. doi:10.1007/s12598-024-03108-7
BibTeX
@article{Zhang2025,
author = {Zhang, Si‐Yu and Guo, Xing and Xu, Yu‐Meng and Jiao, Yong and Lin, Zhen‐Hua and Zhang, Jin‐Cheng and Ouyang, Jian‐Yong and Guo, Li‐Xin and Hao, Yue and Chang, Jing‐Jing},
title = {Optimizing ETL/CsPbBr 3 buried interface contact for enhanced efficiency and stability of inorganic perovskite solar cells},
journal = {Rare Metals},
year = {2025},
volume = {44},
number = {5},
pages = {3069--3079},
doi = {10.1007/s12598-024-03108-7}
}
EUVIMED