EUVIMEDEUVIMED entdecken
Crossref

Constructing three‐dimensional hydrogen‐bonding network and porous film from chitosan enables high‐performance silicon@carbon anode

Qun‐Yin Li, Ze‐Yu Li, Miao Ben, San‐Ning Kang, Min‐Jian Yang, Si‐Yu Wu, Yi‐Fei Xiong, Lin Li, Rong Zeng, Jian‐Feng Mao, Jian‐Wen Liu

Rare Metals · 2024-12 · 43 (12) · 6340-6350

DOI: 10.1007/s12598-024-02872-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rare Metals, online erschienen am 11.07.2024. Verfasst von Qun‐Yin Li und 10 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China, The Joint Fund of Bijie City and Guizhou University of Engineering Science, Open Funding Project of the State Key Laboratory of Biocatalysis and Enzyme Engineering.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anodes based on silicon@carbon (Si@C) composites are expected to be used in the next generation of commercial lithium‐ion batteries due to their high specific capacity and high element abundance. However, particle pulverization and falling off, caused by volume expansion and repeated rupture and formation of SEI on electrode surface, still hinder its industrialization. Herein, a three‐dimensional hydrogen‐bonding network and porous film structure are constructed from chitosan (CS), polyvinyl alcohol and polyvinylpyrrolidone to enable high‐performance Si@C anode in this work. The formed hydrogen‐bonding network can significantly improve the electrical conductivity. The unique porous film structure, owing to a high specific surface area, can increase the contact between the material and the electrolyte and effectively accommodate the expansion effect of the electrode during the cycle. After 800 cycles at the current density of 500 mA·g −1 , the reversible specific capacity remains at 945.8 mAh·g −1 . When testing rate performance, the specific capacity can still reach 522 mAh·g −1 under the current density of 2000 mA·g −1 and returns to 1126 mAh·g −1 at 100 mA·g −1 . The porous film material proposed in this work has a simple preparation method and excellent properties, which will provide useful provision for the industrial application of Si@C materials in the future.

Förderung

  • National Natural Science Foundation of China
  • The Joint Fund of Bijie City and Guizhou University of Engineering Science
  • Open Funding Project of the State Key Laboratory of Biocatalysis and Enzyme Engineering

Zitieren

APA

Li, Q., Li, Z., Ben, M., Kang, S., Yang, M., Wu, S., Xiong, Y., Li, L., Zeng, R., Mao, J., & Liu, J. (2024). Constructing three‐dimensional hydrogen‐bonding network and porous film from chitosan enables high‐performance silicon@carbon anode. Rare Metals, 43(12), 6340-6350. https://doi.org/10.1007/s12598-024-02872-w

Vancouver

Li Q, Li Z, Ben M, Kang S, Yang M, Wu S, et al. Constructing three‐dimensional hydrogen‐bonding network and porous film from chitosan enables high‐performance silicon@carbon anode. Rare Metals. 2024;43(12):6340-6350. doi:10.1007/s12598-024-02872-w

BibTeX
@article{Li2024,
  author = {Li, Qun‐Yin and Li, Ze‐Yu and Ben, Miao and Kang, San‐Ning and Yang, Min‐Jian and Wu, Si‐Yu and Xiong, Yi‐Fei and Li, Lin and Zeng, Rong and Mao, Jian‐Feng and Liu, Jian‐Wen},
  title = {Constructing three‐dimensional hydrogen‐bonding network and porous film from chitosan enables high‐performance silicon@carbon anode},
  journal = {Rare Metals},
  year = {2024},
  volume = {43},
  number = {12},
  pages = {6340--6350},
  doi = {10.1007/s12598-024-02872-w}
}
Kostenlos starten →