Satellite design optimization for differential lift and drag applications
CEAS Space Journal · 2025-01 · 17 (1) · 11-29
DOI: 10.1007/s12567-024-00550-2 ↗Kurz gefasst
Fachartikel in der Zeitschrift CEAS Space Journal, online erschienen am 22.04.2024. Verfasst von Claudia Marianowski und 4 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universität Stuttgart.
Abstract (Originalsprache)
Utilizing differential atmospheric forces in the very low earth orbits (VLEO) regime for the control of the relative motion within a satellite formation is a promising option as any thrusting device has significant impact on system design due to the limited weight and size restrictions of small satellites. One possible approach to increase the available accelerations caused by the atmosphere is to reduce the mass of the respective satellites as well as to increase the available surface area. However, satellites of these characteristics suffer from rapid orbital decay and consequently have a reduced service lifetime. Therefore, achieving higher control forces is in contradiction to achieving a minimum orbital decay of the satellites, which currently represents one of the biggest challenges in the VLEO regime. In this article, the geometry of a given reference satellite, a 3UCubeSat, is optimized under the consideration of different surface material properties for differential lift and drag control applications while simultaneously ensuring a sustained VLEO operation. It is worth noting that both the consideration of sustainability as well as the optimization with regard to differential lift are new in literature. It was shown that the advantageous geometries strongly depend on the type of gas–surface interaction and thus, two different final designs, one for each extreme type, are presented. In both cases, improvements in all relevant parameters could be achieved solely via geometry adaptions.
Förderung
- Universität Stuttgart
Zitieren
APA
Marianowski, C., Traub, C., Pfeiffer, M., Beyer, J., & Fasoulas, S. (2025). Satellite design optimization for differential lift and drag applications. CEAS Space Journal, 17(1), 11-29. https://doi.org/10.1007/s12567-024-00550-2
Vancouver
Marianowski C, Traub C, Pfeiffer M, Beyer J, Fasoulas S. Satellite design optimization for differential lift and drag applications. CEAS Space Journal. 2025;17(1):11-29. doi:10.1007/s12567-024-00550-2
BibTeX
@article{Marianowski2025,
author = {Marianowski, Claudia and Traub, Constantin and Pfeiffer, Marcel and Beyer, Julian and Fasoulas, Stefanos},
title = {Satellite design optimization for differential lift and drag applications},
journal = {CEAS Space Journal},
year = {2025},
volume = {17},
number = {1},
pages = {11--29},
doi = {10.1007/s12567-024-00550-2}
}
EUVIMED