EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling, Simulation and Fabrication of Highly Sensitive Acetone Gas Detection Sensor using MEMS Technology

Abdullah S. Algamili, Zaid Ahmed Shamsan, Nor Ashidi Mat Isa, Hussien Shutari

International Journal of Precision Engineering and Manufacturing · 2026-05 · 27 (5) · 2045-2066

DOI: 10.1007/s12541-025-01422-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Precision Engineering and Manufacturing, online erschienen am 16.03.2026. Verfasst von Abdullah S. Algamili und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universiti Sains Malaysia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Major public health concerns include obesity, diabetes, and related metabolic disorders. These conditions impact physical health, cognitive function, and psychological well-being. Acetone in human breath serves as a key biomarker. It offers a non-invasive, painless, and cost-effective means of monitoring fat metabolism and early signs of diabetes. This study introduces a microelectromechanical systems (MEMS)-based gas sensor. It is developed using the standard Polysilicon Multi-User MEMS Process (PolyMUMPs) process, for sensitive and selective breath acetone detection. The sensor includes a suspended microstructure with a gold micro-heater and temperature sensor, actuated electrothermally to produce displacement. A nanostructured TiO 2 coating enhances acetone adsorption, increasing the sensor’s mass and altering its resonance. These changes are converted into electrical signals using a capacitive readout circuit (MS3110). Modeling and simulations were used to optimize performance, followed by experimental validation. The sensor detected acetone concentrations from 0.01 to 4 ppm, with a minimum detection limit of 44 ppb. Output voltage ranged from 0.176 to 0.295 V, showing a sensitivity of 0.029 V/ppm. It responded in about 90 seconds and recovered in 15 seconds. The sensor also showed strong selectivity against other VOCs, making it suitable for non-invasive breath analysis. Overall, the device offers a promising solution for portable, low-power acetone detection in applications like obesity screening, metabolic monitoring, and personalized healthcare.

Förderung

  • Universiti Sains Malaysia

Zitieren

APA

Algamili, A. S., Shamsan, Z. A., Isa, N. A. M., & Shutari, H. (2026). Modeling, Simulation and Fabrication of Highly Sensitive Acetone Gas Detection Sensor using MEMS Technology. International Journal of Precision Engineering and Manufacturing, 27(5), 2045-2066. https://doi.org/10.1007/s12541-025-01422-3

Vancouver

Algamili AS, Shamsan ZA, Isa NAM, Shutari H. Modeling, Simulation and Fabrication of Highly Sensitive Acetone Gas Detection Sensor using MEMS Technology. International Journal of Precision Engineering and Manufacturing. 2026;27(5):2045-2066. doi:10.1007/s12541-025-01422-3

BibTeX
@article{Algamili2026,
  author = {Algamili, Abdullah S. and Shamsan, Zaid Ahmed and Isa, Nor Ashidi Mat and Shutari, Hussien},
  title = {Modeling, Simulation and Fabrication of Highly Sensitive Acetone Gas Detection Sensor using MEMS Technology},
  journal = {International Journal of Precision Engineering and Manufacturing},
  year = {2026},
  volume = {27},
  number = {5},
  pages = {2045--2066},
  doi = {10.1007/s12541-025-01422-3}
}
Kostenlos starten →