EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preliminary Study of Stone Sawing Sludges-based Alkali Activated Materials (AAMs) for the Conservation of Archaeological Ceramics

Silvia Portale, Margrethe Felter, Angeliki Zisi, Calin Constantin Steindal, Lavinia de Ferri, Paolo Mazzoleni, Germana Barone

Geoheritage · 2024-12 · 16 (4)

DOI: 10.1007/s12371-024-01010-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Geoheritage, online erschienen am 18.09.2024. Verfasst von Silvia Portale und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Oslo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents research into the feasibility of using stone sawing sludge-based Alkali Activated Materials (AAMs) for conservation of Cultural Heritage. Sawing sludges are a stone processing waste product resulting from the mixing of rock powder with the water used to cool down the cutting blades. The chemical composition of the sawing sludges, when aluminosilicatic, is suitable for acting as a precursor to produce AAMs. AAMs are known for their low environmental impact and versatility since their existence is drawn from recycling waste materials. One of their possible applications is in the conservation of Cultural Heritage objects. This work presents a preliminary investigation into three sawing sludge-based AAMs with different mineralogical compositions and contributes to formulating guidelines for applying them as fillers on modern and archaeological ceramic pottery based on the evaluation of their workability, appearance and physical properties over time from the moment of application and up to 30 days. Dynamic Vapor Sorption and X-Ray Diffraction results provided an overview of the structural and mineralogical changes under high RH conditions, where the tested AAMs showed a type II isotherm curve, as expected for concrete-like materials, as well as disappearance of thermonatrite after one isothermal cycle. Ultrasonic Pulse Velocity test demonstrated the general homogeneity of the AAMs despite the lower velocity exhibited by one of the formulations, probably due to its internal pore distribution and possible presence of microstratification. The Oddy tests, application tests and colourimetric measurements evidenced the advantages and weaknesses of the AAMs, with overall encouraging results ensuing investment in further in-depth studies of these innovative conservation materials in view of their future use in the field of conservation of Cultural Heritage as a result of a circular economy model.

Förderung

  • University of Oslo

Zitieren

APA

Portale, S., Felter, M., Zisi, A., Steindal, C. C., Ferri, L. D., Mazzoleni, P., & Barone, G. (2024). Preliminary Study of Stone Sawing Sludges-based Alkali Activated Materials (AAMs) for the Conservation of Archaeological Ceramics. Geoheritage, 16(4). https://doi.org/10.1007/s12371-024-01010-3

Vancouver

Portale S, Felter M, Zisi A, Steindal CC, Ferri LD, Mazzoleni P, et al. Preliminary Study of Stone Sawing Sludges-based Alkali Activated Materials (AAMs) for the Conservation of Archaeological Ceramics. Geoheritage. 2024;16(4). doi:10.1007/s12371-024-01010-3

BibTeX
@article{Portale2024,
  author = {Portale, Silvia and Felter, Margrethe and Zisi, Angeliki and Steindal, Calin Constantin and Ferri, Lavinia de and Mazzoleni, Paolo and Barone, Germana},
  title = {Preliminary Study of Stone Sawing Sludges-based Alkali Activated Materials (AAMs) for the Conservation of Archaeological Ceramics},
  journal = {Geoheritage},
  year = {2024},
  volume = {16},
  number = {4},
  doi = {10.1007/s12371-024-01010-3}
}
Kostenlos starten →