EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quasi-static and Thermoviscoelastic Response of Carbon/Epoxy–Aluminum FMLs: Effects of Stacking Sequence and Graphene–TiO2 Nano-modification

Hasan Ulus, Mehmet Emin Çetin, Bertan Beylergil, Halil Burak Kaybal

Fibers and Polymers · 2026-05 · 27 (5) · 2463-2484

DOI: 10.1007/s12221-026-01371-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fibers and Polymers, online erschienen am 05.03.2026. Verfasst von Hasan Ulus und 3 weiteren Autor:innen. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Necmettin Erbakan Üniversitesi, Selcuk University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon/epoxy–aluminum fiber metal laminates (FMLs) offer high specific performance and damage tolerance, yet their response is strongly governed by the stacking sequence and interfacial load transfer. In this study, we investigate the how stacking sequence and graphene–TiO 2 nano-modification of the epoxy matrix influence the quasi-static and thermoviscoelastic behavior of carbon/epoxy–Al FMLs. Three architectures were considered: a CFRP reference, a two-aluminum-ply laminate, and an interface-rich alternating configuration. Neat and nano-modified epoxy matrices were compared, and selected specimens were tested in reverse orientation to investigate face placement during bending. Tensile and three-point bending tests were complemented by dynamic mechanical analysis (DMA) to track storage modulus and damping. Nano-modification increased tensile strength from 750 to 928 MPa for the CFRP reference and from 384 to 599 MPa for the interface-rich laminate, while modulus gains remained moderate. In bending, flexural strength increased by about 27 to 34% in the CFRP-rich and two-aluminum-ply laminates and by about 47 to 51% in the alternating architecture. Reverse loading further stabilized the bending response through favorable face placement. DMA showed higher storage modulus in the glassy region and an upward shift in T g of approximately 5 to 7 ℃. Across all laminates, flexural modulus tracked DMA storage modulus, indicating that thermoviscoelastic stiffness captures architecture and interface-driven stiffness changes consistently.

Förderung

  • Necmettin Erbakan Üniversitesi
  • Selcuk University

Zitieren

APA

Ulus, H., Çetin, M. E., Beylergil, B., & Kaybal, H. B. (2026). Quasi-static and Thermoviscoelastic Response of Carbon/Epoxy–Aluminum FMLs: Effects of Stacking Sequence and Graphene–TiO2 Nano-modification. Fibers and Polymers, 27(5), 2463-2484. https://doi.org/10.1007/s12221-026-01371-2

Vancouver

Ulus H, Çetin ME, Beylergil B, Kaybal HB. Quasi-static and Thermoviscoelastic Response of Carbon/Epoxy–Aluminum FMLs: Effects of Stacking Sequence and Graphene–TiO2 Nano-modification. Fibers and Polymers. 2026;27(5):2463-2484. doi:10.1007/s12221-026-01371-2

BibTeX
@article{Ulus2026,
  author = {Ulus, Hasan and Çetin, Mehmet Emin and Beylergil, Bertan and Kaybal, Halil Burak},
  title = {Quasi-static and Thermoviscoelastic Response of Carbon/Epoxy–Aluminum FMLs: Effects of Stacking Sequence and Graphene–TiO2 Nano-modification},
  journal = {Fibers and Polymers},
  year = {2026},
  volume = {27},
  number = {5},
  pages = {2463--2484},
  doi = {10.1007/s12221-026-01371-2}
}
Kostenlos starten →