Application of metal cored filler wire for environmental-friendly welding of low alloy steel: experimental investigation and parametric optimization
International Journal on Interactive Design and Manufacturing (IJIDeM) · 2024-12 · 18 (10) · 7445-7458
DOI: 10.1007/s12008-024-01780-8 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal on Interactive Design and Manufacturing (IJIDeM), online erschienen am 26.03.2024. Verfasst von Kumar Abhishek und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Manipal Academy of Higher Education, Bangalore.
Abstract (Originalsprache)
Motivated by the crescente demand for eco-friendly and worker-safe welding techniques, this study optimizes current (A), voltage (V), and gas flow rate (GFR) for regulated metal deposition (RMD) welding of ASME SA387 Gr.11 Cl.2 steel. Employing MEGAFIL 237 M metal cored filler wire and a Taguchi L 9 orthogonal array, bead-on-plate trials were conducted to evaluate heat-affected zone (HAZ), depth of penetration (DOP), and bead width (BW). A unique dual-pronged optimization approach was implemented. The utility function method, combined with Taguchi’s signal-to-noise (S/N) ratio, maximized desirable and minimized undesirable responses. Additionally, TOPSIS with Taguchi S/N ratio identified the optimal process parameters. Both optimization strategies converged on identical. A = 135 A, V = 14 V, and GFR = 13 L/min. Notably, voltage emerged as the most influential factor in the mean S/N response table, highlighting its critical role in controlling weld quality. The proposed procedures offer a robust framework for determining optimal RMD welding conditions in pipeline applications. This not only enhances weld integrity and worker safety but also paves the way for sustainable manufacturing and continuous quality improvement in the field.
Förderung
- Manipal Academy of Higher Education, Bangalore
Zitieren
APA
Abhishek, K., Prajapati, V., Kumari, S., Potnuru, B. K., & Bandhu, D. (2024). Application of metal cored filler wire for environmental-friendly welding of low alloy steel: experimental investigation and parametric optimization. International Journal on Interactive Design and Manufacturing (IJIDeM), 18(10), 7445-7458. https://doi.org/10.1007/s12008-024-01780-8
Vancouver
Abhishek K, Prajapati V, Kumari S, Potnuru BK, Bandhu D. Application of metal cored filler wire for environmental-friendly welding of low alloy steel: experimental investigation and parametric optimization. International Journal on Interactive Design and Manufacturing (IJIDeM). 2024;18(10):7445-7458. doi:10.1007/s12008-024-01780-8
BibTeX
@article{Abhishek2024,
author = {Abhishek, Kumar and Prajapati, Vishalkumar and Kumari, Soni and Potnuru, Balaji Krushna and Bandhu, Din},
title = {Application of metal cored filler wire for environmental-friendly welding of low alloy steel: experimental investigation and parametric optimization},
journal = {International Journal on Interactive Design and Manufacturing (IJIDeM)},
year = {2024},
volume = {18},
number = {10},
pages = {7445--7458},
doi = {10.1007/s12008-024-01780-8}
}
EUVIMED