EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure Prediction of 80MnSi8-6 Steel After Hot Deformation Based on Dynamic Recrystallization Kinetics and FEM Simulation

Krystian Zyguła, Kamil Cichocki, Karolina Kowalczyk, Michał Puławski, Grzegorz Korpała, Marek Wojtaszek, Magdalena Jabłońska, Ulrich Prahl

JOM · 2024-09 · 76 (9) · 5193-5209

DOI: 10.1007/s11837-024-06648-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift JOM, online erschienen am 30.05.2024. Verfasst von Krystian Zyguła und 7 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowe Centrum Nauki.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructure evolution during hot deformation of 80MnSi8-6 nanobainitic steel was investigated through hot compression tests at deformation temperatures of 900–1250°C and strain rates of 0.1–20 s −1 . The flow curves revealed strain-hardening behavior at the beginning of deformation followed by softening effects caused by microstructure evolution. A Johnson–Mehl–Avrami–Kolmogorov (JMAK) model for grain growth and dynamic recrystallization was developed, and the kinetics were determined. Critical and peak strains were identified, and coefficients for the microstructure evolution models were determined using linear regression. The analysis of S -curves revealed that decreasing the temperature delays the onset of recrystallization and that the strain rate significantly effects the recrystallization rate at lower temperatures. Constitutive modeling and determination of the Zener–Hollomon parameter allowed the determination of the influence of hot processing conditions on material behavior during deformation. Microstructure analysis showed that, at higher deformation temperatures, grain growth occurs simultaneously with grain refinement. Coefficients for the JMAK model were implemented in QForm software. Simulation results were compared with experimental measurements exhibited good arrangement, which confirms the accuracy of the JMAK model in predicting the microstructure evolution. This study demonstrated how microstructure evolution modeling and FEM simulations combined can be used to predict the grain size of 80MnSi8-6 steel after hot deformation.

Förderung

  • Narodowe Centrum Nauki

Zitieren

APA

Zyguła, K., Cichocki, K., Kowalczyk, K., Puławski, M., Korpała, G., Wojtaszek, M., Jabłońska, M., & Prahl, U. (2024). Microstructure Prediction of 80MnSi8-6 Steel After Hot Deformation Based on Dynamic Recrystallization Kinetics and FEM Simulation. JOM, 76(9), 5193-5209. https://doi.org/10.1007/s11837-024-06648-6

Vancouver

Zyguła K, Cichocki K, Kowalczyk K, Puławski M, Korpała G, Wojtaszek M, et al. Microstructure Prediction of 80MnSi8-6 Steel After Hot Deformation Based on Dynamic Recrystallization Kinetics and FEM Simulation. JOM. 2024;76(9):5193-5209. doi:10.1007/s11837-024-06648-6

BibTeX
@article{Zygua2024,
  author = {Zyguła, Krystian and Cichocki, Kamil and Kowalczyk, Karolina and Puławski, Michał and Korpała, Grzegorz and Wojtaszek, Marek and Jabłońska, Magdalena and Prahl, Ulrich},
  title = {Microstructure Prediction of 80MnSi8-6 Steel After Hot Deformation Based on Dynamic Recrystallization Kinetics and FEM Simulation},
  journal = {JOM},
  year = {2024},
  volume = {76},
  number = {9},
  pages = {5193--5209},
  doi = {10.1007/s11837-024-06648-6}
}
Kostenlos starten →